Hello, I don't get wlan with wpa working on my powerbook g4 with etch.
This is the lspci output: 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) This is my /etc/network/interfaces file: auto eth2 iface eth2 inet manual wpa-sriver wext wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface office inet dhcp iface anywhere inet dhcp This is my /etc/wpa_supplicant/wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant network={ id_str="office" ssid="gh-office-wlan" # = airport network name psk="64-byte hex-string obtained with wpa_passphrase" } network={ id_str="anywhere" ssid="" key_mgmt=NONE } The network-admin says "wireless network eth2 active" but under properties, the network is not selected. It appears in the pop-up menu though and I can select it, but afterwards ping returns "network unreachable". There is no wpa_action.log file in /var/log. Any ideas? Thanks in advance, G. Heinrich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]