Using Buffalo Linkstation machine description
Linux version 2.6.27-rc5.try03 (rbrito@chagas) (gcc version 4.2.0) #4 Mon Sep 8 21:12:13 BRT 2008
Found legacy serial port 0 for /soc10x/serial@80004500
  mem=80004500, taddr=80004500, irq=0, clk=97553800, speed=9600
Found legacy serial port 1 for /soc10x/serial@80004600
  mem=80004600, taddr=80004600, irq=0, clk=97553800, speed=57600
console [udbg0] enabled
Adding PCI host bridge /soc10x/pci@fec00000
PCI host bridge /soc10x/pci@fec00000 (primary) ranges:
  IO 0x00000000fe000000..0x00000000febfffff -> 0x0000000000000000
 MEM 0x0000000080000000..0x00000000efffffff -> 0x0000000080000000 
BUFFALO Network Attached Storage Series
(C) 2002-2005 BUFFALO INC.
Top of RAM: 0x4000000, Total RAM: 0x4000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA      0x00000000 -> 0x00004000
  Normal   0x00004000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c033fc04, node_mem_map c037b000
  DMA zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32
Unknown boot option `rtc-rs5c372.probe=0,0x32': ignoring
mpic: Setting up MPIC " EPIC     " version 1.2 at 80040000, max 1 CPUs
mpic: ISU size: 4, shift: 2, mask: 3
mpic: Initializing for 12 sources
PID hash table entries: 256 (order: 8, 1024 bytes)
time_init: decrementer frequency = 24.391680 MHz
time_init: processor frequency   = 196.608000 MHz
clocksource: timebase mult[a3fd873] shift[22] registered
clockevent: decrementer mult[63e] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61332k/65536k available (3276k kernel code, 4144k reserved, 136k data, 102k bss, 164k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 48.74 BogoMIPS (lpj=243712)
Mount-cache hash table entries: 512
net_namespace: 288 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: supports D1
pci 0000:00:0c.0: supports D2
pci 0000:00:0e.0: supports D1
pci 0000:00:0e.0: supports D2
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0e.1: supports D1
pci 0000:00:0e.1: supports D2
pci 0000:00:0e.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0e.1: PME# disabled
pci 0000:00:0e.2: supports D1
pci 0000:00:0e.2: supports D2
pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0e.2: PME# disabled
bus: 00 index 0 io port: [bfffff, 100c037b000]
bus: 00 index 1 mmio: [80000000efffffff, c67]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 119
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x80004500 (irq = 19) is a 16550A
serial8250.0: ttyS1 at MMIO 0x80004600 (irq = 20) is a 16550A
brd: module loaded
loop: module loaded
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
tulip0:  MII transceiver #1 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at MMIO 0xbffffc00, 00:07:40:fb:20:d7, IRQ 16.
netconsole: local port 6666
netconsole: local IP 192.168.11.150
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.11.149
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
netconsole: device eth0 not up yet, forcing it
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
0000:00:0b.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
console [netcon0] enabled
netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
pata_sil680 0000:00:0c.0: version 0.4.8
sil680: 133MHz clock.
scsi0 : pata_sil680
scsi1 : pata_sil680
ata1: PATA max UDMA/133 cmd 0xbffed0 ctl 0xbffed8 bmdma 0xbffef0 irq 17
ata2: PATA max UDMA/133 cmd 0xbffee0 ctl 0xbffee8 bmdma 0xbffef8 irq 17
ata1.00: ATA-6: HDS722516VLAT20, V34OA6EA, max UDMA/100
ata1.00: 321672960 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HDS722516VLAT20  V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
physmap platform flash device: 00400000 at ffc00000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 6 MTD partitions on "physmap-flash.0":
0x00000000-0x00300000 : "mtd_firmimg"
0x00300000-0x00370000 : "mtd_bootcode"
kobject (c395b278): tried to init an initialized object, something is seriously wrong.
Call Trace:
[c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable)
[c381dcc0] [c013a308] kobject_init+0x64/0xa4
[c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78
[c381dd10] [c0135574] blk_register_filter+0x4c/0x70
[c381dd20] [c01340a4] add_disk+0x68/0xbc
[c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4
[c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80
[c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84
[c381dd90] [c01ac118] add_mtd_device+0xa8/0x140
[c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0
[c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318
[c381de50] [c0175864] platform_drv_probe+0x20/0x30
[c381de60] [c0174748] driver_probe_device+0xb8/0x1e8
[c381de80] [c01738ec] bus_for_each_drv+0x70/0xac
[c381deb0] [c01749c8] device_attach+0x84/0xa8
[c381ded0] [c01736e0] bus_attach_device+0x6c/0x78
[c381dee0] [c01720bc] device_add+0x47c/0x5c8
[c381df30] [c0175d30] platform_device_add+0x14c/0x1b4
[c381df50] [c03245fc] physmap_init+0x30/0x48
[c381df60] [c0003874] do_one_initcall+0x38/0x1a0
[c381dfd0] [c030a17c] kernel_init+0x88/0xf4
[c381dff0] [c000fd4c] kernel_thread+0x44/0x60
0x00370000-0x00380000 : "mtd_status"
kobject (c395b278): tried to init an initialized object, something is seriously wrong.
Call Trace:
[c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable)
[c381dcc0] [c013a308] kobject_init+0x64/0xa4
[c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78
[c381dd10] [c0135574] blk_register_filter+0x4c/0x70
[c381dd20] [c01340a4] add_disk+0x68/0xbc
[c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4
[c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80
[c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84
[c381dd90] [c01ac118] add_mtd_device+0xa8/0x140
[c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0
[c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318
[c381de50] [c0175864] platform_drv_probe+0x20/0x30
[c381de60] [c0174748] driver_probe_device+0xb8/0x1e8
[c381de80] [c01738ec] bus_for_each_drv+0x70/0xac
[c381deb0] [c01749c8] device_attach+0x84/0xa8
[c381ded0] [c01736e0] bus_attach_device+0x6c/0x78
[c381dee0] [c01720bc] device_add+0x47c/0x5c8
[c381df30] [c0175d30] platform_device_add+0x14c/0x1b4
[c381df50] [c03245fc] physmap_init+0x30/0x48
[c381df60] [c0003874] do_one_initcall+0x38/0x1a0
[c381dfd0] [c030a17c] kernel_init+0x88/0xf4
[c381dff0] [c000fd4c] kernel_thread+0x44/0x60
0x00380000-0x00400000 : "mtd_conf"
kobject (c395b278): tried to init an initialized object, something is seriously wrong.
Call Trace:
[c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable)
[c381dcc0] [c013a308] kobject_init+0x64/0xa4
[c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78
[c381dd10] [c0135574] blk_register_filter+0x4c/0x70
[c381dd20] [c01340a4] add_disk+0x68/0xbc
[c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4
[c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80
[c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84
[c381dd90] [c01ac118] add_mtd_device+0xa8/0x140
[c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0
[c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318
[c381de50] [c0175864] platform_drv_probe+0x20/0x30
[c381de60] [c0174748] driver_probe_device+0xb8/0x1e8
[c381de80] [c01738ec] bus_for_each_drv+0x70/0xac
[c381deb0] [c01749c8] device_attach+0x84/0xa8
[c381ded0] [c01736e0] bus_attach_device+0x6c/0x78
[c381dee0] [c01720bc] device_add+0x47c/0x5c8
[c381df30] [c0175d30] platform_device_add+0x14c/0x1b4
[c381df50] [c03245fc] physmap_init+0x30/0x48
[c381df60] [c0003874] do_one_initcall+0x38/0x1a0
[c381dfd0] [c030a17c] kernel_init+0x88/0xf4
[c381dff0] [c000fd4c] kernel_thread+0x44/0x60
0x00000000-0x00400000 : "mtd_allflash"
kobject (c395b278): tried to init an initialized object, something is seriously wrong.
Call Trace:
[c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable)
[c381dcc0] [c013a308] kobject_init+0x64/0xa4
[c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78
[c381dd10] [c0135574] blk_register_filter+0x4c/0x70
[c381dd20] [c01340a4] add_disk+0x68/0xbc
[c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4
[c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80
[c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84
[c381dd90] [c01ac118] add_mtd_device+0xa8/0x140
[c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0
[c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318
[c381de50] [c0175864] platform_drv_probe+0x20/0x30
[c381de60] [c0174748] driver_probe_device+0xb8/0x1e8
[c381de80] [c01738ec] bus_for_each_drv+0x70/0xac
[c381deb0] [c01749c8] device_attach+0x84/0xa8
[c381ded0] [c01736e0] bus_attach_device+0x6c/0x78
[c381dee0] [c01720bc] device_add+0x47c/0x5c8
[c381df30] [c0175d30] platform_device_add+0x14c/0x1b4
[c381df50] [c03245fc] physmap_init+0x30/0x48
[c381df60] [c0003874] do_one_initcall+0x38/0x1a0
[c381dfd0] [c030a17c] kernel_init+0x88/0xf4
[c381dff0] [c000fd4c] kernel_thread+0x44/0x60
0x00310000-0x00400000 : "mtd_data"
kobject (c395b278): tried to init an initialized object, something is seriously wrong.
Call Trace:
[c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable)
[c381dcc0] [c013a308] kobject_init+0x64/0xa4
[c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78
[c381dd10] [c0135574] blk_register_filter+0x4c/0x70
[c381dd20] [c01340a4] add_disk+0x68/0xbc
[c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4
[c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80
[c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84
[c381dd90] [c01ac118] add_mtd_device+0xa8/0x140
[c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0
[c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318
[c381de50] [c0175864] platform_drv_probe+0x20/0x30
[c381de60] [c0174748] driver_probe_device+0xb8/0x1e8
[c381de80] [c01738ec] bus_for_each_drv+0x70/0xac
[c381deb0] [c01749c8] device_attach+0x84/0xa8
[c381ded0] [c01736e0] bus_attach_device+0x6c/0x78
[c381dee0] [c01720bc] device_add+0x47c/0x5c8
[c381df30] [c0175d30] platform_device_add+0x14c/0x1b4
[c381df50] [c03245fc] physmap_init+0x30/0x48
[c381df60] [c0003874] do_one_initcall+0x38/0x1a0
[c381dfd0] [c030a17c] kernel_init+0x88/0xf4
[c381dff0] [c000fd4c] kernel_thread+0x44/0x60
usbmon: debugfs is not available
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: irq 18, io mem 0xbfffcf00
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 18, io mem 0xbfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0e.1: OHCI Host Controller
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 18, io mem 0xbfffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
linkstation: disarming the AVR watchdog: 
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k init
Adding 530136k swap on /dev/sda2.  Priority:-1 extents:1 across:530136k
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
