Hi, Sylvain. On Sep 15 2008, Sylvain Joyeux wrote: > I upgraded to 2.6.26 to get a working rt2x00 driver
I'm also on the same boat, but I had a lengthy discussion and debugging session with Ivo van Doorn, the maintainer of rt2x00, to get my wifi stick working and, to cut a long story short, the driver stopped working on 2.6.26 on (at least) amd64, but he told me that he found the problem and fixed it on 2.6.27 (and I confirmed this on amd64, at least). He said that he doesn't intend to backport the changes to 2.6.26. Are you able to use rt2x00 without problems on Debian's 2.6.26? > I'm using a ralink wifi card to talk to the box. But now, the USB UHCI > controller is not available anymore (full dmesg attached). > > The most relevant part seems to be the following: > [ 12.371696] uhci_hcd 0000:00:0d.0: Found HC with no IRQ. Check BIOS/PCI > 0000:00:0d.0 setup! > [ 12.398250] uhci_hcd 0000:00:0d.1: Found HC with no IRQ. Check BIOS/PCI > 0000:00:0d.1 setup! > Any ideas ? * I think that communicating this to the kernel team would be a good thing. * The other thing that you can do is try to compile one of the release candidates of 2.6.27 (or 2.6.27 proper, if it has already been released). > 00:0d.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 62) > 00:0d.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 62) > 00:0d.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 > [EHCI]) I have a two port USB 2.0 card with a VIA chipset here that I will try on my old PowerMac 8500 180/MP to see if I am able to use it. What are the problems that you found with EHCI, BTW? Regards, Rogério Brito. -- Rogério Brito : [EMAIL PROTECTED],ime.usp}.br : GPG key 1024D/7C2CAEB8 http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
