Le dimanche 22 mars 2009 à 10:48 -0500, Ross Gohlke a écrit : > I also looked into netbooting, but documentation is inconsistent and I > could not find netbootable binaries.
I netbooted my powerbook to install Debian on it, and it went smoothly (I already had an experience by netbooting some OpenWrt router ; I also netbooted back my amd64 from my powerbook ... so I may be a bit more experienced, but with some docs it goes ok) The files used to netboot lenny and the documentation can be found here : http://www.debian.org/distrib/netinst#netboot I set up dhcp3-server, tftpd-hpa, and can then netboot my PB. The hardest part was finding the correct way to configure some quirks of Apple's way of netbooting. In the DHCP server config, you must specify both next-server and server-identifier to the IP of your netboot server. Also, setting a filename gets ignored by open-firmware's netbooting code. So, the correct command to use when in OF on your PB : boot enet:0,yaboot This should be enough to get you running the debian installer. Don't hesitate to ask if you need some more details. Regards, benjamin -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
