Hello, I and also the other guys in our forum already tried to install 7.8, which ends in the same problem like 8.0. Which version was running on your Peg-2?
I only remember that 6.x was running fine. But it would be nice to find the problem, because the part with the installation works fine up to 95%. MfG, Robert Send from iPhone 5 > Am 01.05.2015 um 17:30 schrieb Herminio Hernandez Jr. > <herminio.hernande...@gmail.com>: > > Thanks for responding > > Sent from my iPhone > >> On May 1, 2015, at 10:28 AM, Luigi Burdo <intermedi...@hotmail.com> wrote: >> >> Guys i had this machine with radeon radeon 9000 and / 9800pro >> and was working good with debian wheezy 7.x . >> i sold it in september 2014. >> the machine is one of the best powerpc platform that i had ...phase 5 after >> bplan after genensis >> was make great hardware. >> >> i suggest the guys to install wheezy that was tested and working by me in >> person. >> >> >> Luigi >> >> >>> On 01/05/15 16:57, Herminio Hernandez, Jr. wrote: >>> Do you have any advice for these guys? >>> >>> ---------- Forwarded message ---------- >>> From: aPEX <a...@gmx.ch> >>> Date: Fri, May 1, 2015 at 9:36 AM >>> Subject: Re: Debian 8.0 PPC not working on Pegasos II G4 >>> To: "Herminio Hernandez Jr." <herminio.hernande...@gmail.com> >>> >>> >>> Hello Herminio, >>> >>> in our forum now 3 other guys with a PEG-II did a test and came excatly to >>> the same result / problem. >>> >>> I am not a linux specialist, but the kernel part which is starting the >>> installation is working fine. >>> But because the installation fail and later also the booting there must be >>> a difference in the >>> kernel which is installed later. >>> >>> The Pegasos is based on the CHRP plattform: >>> http://www.freescale.com/files/32bit/doc/app_note/AN2666.pdf >>> >>> Thank you if you can help in any kind. >>> >>> Best regards, Robert >>> >>> >>> >>>> Am 01.05.2015 um 16:27 schrieb Herminio Hernandez Jr. >>>> <herminio.hernande...@gmail.com>: >>>> >>>> Oh that is not good. Let me reach out to a friend. >>>> >>>> Sent from my iPhone >>>> >>>> On May 1, 2015, at 8:41 AM, aPEX <a...@gmx.ch> wrote: >>>> >>>>> Hello, >>>>> >>>>> I tried this but it ends in this, see picture. >>>>> <IMG_0051.JPG> >>>>> >>>>> >>>>> >>>>>> Am 30.04.2015 um 20:57 schrieb Herminio Hernandez Jr. >>>>>> <herminio.hernande...@gmail.com>: >>>>>> >>>>>> If you are yaboot try this >>>>>> >>>>>> Linux radeon.modeset=1 video=offb:off video=radeonfb:off >>>>>> >>>>>> If that does not help then add this as well radeon.agpmode=-1 >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>>> On Apr 30, 2015, at 1:46 PM, aPEX <a...@gmx.ch> wrote: >>>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> it is a RADEON 9000 Pro with 128MB Memory. >>>>>>> >>>>>>> Best regards, aPEX >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Am 30.04.2015 um 19:38 schrieb Herminio Hernandez Jr. >>>>>>>> <herminio.hernande...@gmail.com>: >>>>>>>> >>>>>>>> What is the video card you are using? >>>>>>>> >>>>>>>> Sent from my iPhone >>>>>>>> >>>>>>>>> On Apr 30, 2015, at 12:07 PM, aPEX <a...@gmx.ch> wrote: >>>>>>>>> >>>>>>>>> Hello, >>>>>>>>> >>>>>>>>> no one who can help? Debian 6.8 was still running fine… >>>>>>>>> I think if I will try Debian 8 I will have same problem like with 7.8? >>>>>>>>> >>>>>>>>> Best regards, aPEX >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Am 27.04.2015 um 20:27 schrieb aPEX <a...@gmx.ch>: >>>>>>>>>> >>>>>>>>>> Hello all, >>>>>>>>>> >>>>>>>>>> I was using a long time Debian 6.x on my Pegasos II G4 with 1Ghz CPU >>>>>>>>>> und 2GB Memory. >>>>>>>>>> Last week I got the stupid idea to install everything new using >>>>>>>>>> latest Debian 7.8, because >>>>>>>>>> on the DVD there is still the install script for the Pegasos. :-) >>>>>>>>>> >>>>>>>>>> Installation itself is working fine till 95% and then abort there, >>>>>>>>>> some like after-installation trigger. >>>>>>>>>> We tested it on several Pegasos II that we have, always the same. I >>>>>>>>>> can go on without installing >>>>>>>>>> more software, but I assume that also some basic stuff is missing. >>>>>>>>>> >>>>>>>>>> Also the 3.x kernel is no more working on the Pegasos II, you will >>>>>>>>>> get screen with grafic trash >>>>>>>>>> right after starting the kernel. >>>>>>>>>> >>>>>>>>>> <IMG_9965.JPG> >>>>>>>>>> >>>>>>>>>> Any idea? I tried it in the IRC, but got no answer. >>>>>>>>>> >>>>>>>>>> It would be really fantastic if this problem could be fixed and the >>>>>>>>>> Pegasos II will work again. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Best regards, Robert aka aPEX >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> PS: I am just a user, no Linux guru, sorry for this… >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org >>>>>>>>> with a subject of "unsubscribe". Trouble? Contact >>>>>>>>> listmas...@lists.debian.org >>>>>>>>> Archive: >>>>>>>>> https://lists.debian.org/a1381917-b685-409d-8700-e25f3186f...@gmx.ch >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org >>>>>>>> with a subject of "unsubscribe". Trouble? Contact >>>>>>>> listmas...@lists.debian.org >>>>>>>> Archive: >>>>>>>> https://lists.debian.org/806dd26d-3f78-411c-9a64-22d775eb5...@gmail.com >>
