---------- Forwarded message ---------- From: Herminio Hernandez, Jr. <[email protected]> Date: Thu, Mar 9, 2017 at 1:48 PM Subject: Re: Re: Problems installing Debian on Powerbooks To: Richard Kuenz <[email protected]>
for audio you need to run this 'modprobe snd-aoa-i2sbus' then 'alsamixer' set the PCM channel to 70. You will want to add the module to /etc/modules. On Thu, Mar 9, 2017 at 1:44 PM, Richard Kuenz <[email protected]> wrote: > https://www.youtube.com/watch?v=c8q2WWkuvbc > > *Gesendet:* Donnerstag, 09. März 2017 um 21:23 Uhr > *Von:* "Herminio Hernandez, Jr." <[email protected]> > *An:* "Lennart Sorensen" <[email protected]> > *Cc:* "Nicholas Dal Porto" <[email protected]>, "John Paul Adrian > Glaubitz" <[email protected]>, "[email protected]" > <[email protected]> > *Betreff:* Re: Problems installing Debian on Powerbooks > Also when you install firmware-b43-installer if when you do 'lsmod' and > see that b43 is loaded, just reload it and wireless should be good. > > modprobe -r b43 > modprobe b43 > > On Thu, Mar 9, 2017 at 1:21 PM, Lennart Sorensen < > [email protected]> wrote: > >> On Thu, Mar 09, 2017 at 10:50:44AM -0800, Nicholas Dal Porto wrote: >> > I have the non-free package installed. >> > >> > Here's the output of lspci -vvv: http://pastebin.com/raw/aQSVwyUW >> > >> > I also have Network Manager installed. Anything I need to do there or >> with any network config files? >> >> I think you need firmware-b43-installer installed. >> >> Claims to be firmware download tool for old b43xx card firmware. >> >> Also can you check 'lsmod' and see if b43 is loaded? >> >> -- >> Len Sorensen >> >> > >
