On Mar 2, 2018, at 7:51 AM, Felix Miata <mrma...@earthlink.net> wrote:
> Rick Thomas composed on 2018-03-02 04:17 (UTC-0800): > >> Felix Miata wrote: > >>> # ybin >>> ofpath: Device: /dev/ata-ST is not supported >>> ybin: Unable to determine OpenFirmware path for >>> macosx=/dev/disk/by-id/ata-ST340015A_5LA13M03-part10 macosx=/dev/hda10 >>> ybin: Try specifying the real OpenFirmware path for >>> macosx=/dev/disk/by-id/ata-ST340015A_5LA13M03-part10 macosx=/dev/hda10 in >>> /etc/yaboot.conf > >>> I tried to add cmdline options via /etc/yaboot.conf, but as above, ybin >>> fails. I've >>> looked at >>> https://www.debian.org/ports/powerpc/inst/yaboot-howto/index.en.html#contents >>> over and over, and the yaboot.conf and ybin man pages, and cannot figure >>> out which >>> partition is the OpenFirmware path that I apparently need to give ybin with >>> the -o >>> option. Can anyone see from what follows what it would be, or tell me how >>> to find it, >>> or what else I'm missing? Is the partition labeled bootstrap (sda13) the >>> same as the >>> OpenFirmware partition? > >>> # ls -l /dev/disk/by-id/*M03 >>> lrwxrwxrwx 1 root root 9 Feb 28 03:13 >>> /dev/disk/by-id/ata-ST340015A_5LA13M03 -> ../../sda > >>> # ls -l /dev/disk/by-label/ >>> total 0 >>> lrwxrwxrwx 1 root root 11 Feb 28 04:04 bootstrap -> ../../sda13 >>> lrwxrwxrwx 1 root root 11 Feb 28 03:13 ST40-OSX -> ../../sda10 > >>> # parted -l /dev/sda >>> Model: ATA ST340015A (scsi) >>> Disk /dev/sda: 40.0GB >>> Sector size (logical/physical): 512B/512B >>> Partition Table: mac >>> Disk Flags: > >>> Number Start End Size File system Name Flags >>> 1 512B 32.8kB 32.3kB Apple >>> 2 32.8kB 61.4kB 28.7kB Macintosh >>> 3 61.4kB 90.1kB 28.7kB Macintosh >>> 4 90.1kB 119kB 28.7kB Macintosh >>> 5 119kB 147kB 28.7kB Macintosh >>> 6 147kB 410kB 262kB Macintosh >>> 7 410kB 672kB 262kB Macintosh >>> 8 672kB 934kB 262kB Patch Partition >>> 13 934kB 135MB 134MB hfs Yaboot boot >>> 10 135MB 20.0GB 19.9GB hfs+ Apple_HFS_Untitled_1 >>> 9 20.0GB 20.9GB 900MB linux-swap(v1) swap swap >>> 11 20.9GB 31.9GB 11.0GB ext4 jessieRoot >>> 12 31.9GB 40.0GB 8109MB ext4 LinuxHome > >>> # blkid /dev/sda1 >>> /dev/sda1: PARTLABEL="Apple" >>> # blkid /dev/sda2 >>> /dev/sda2: PARTLABEL="Macintosh" # &3-7 >>> # blkid /dev/sda8 >>> /dev/sda8: PARTLABEL="Patch Partition" > >>> # ofpath /dev/sda >>> /pci@f4000000/ata-6@d/@1 > >> You’re more likely to get an answer to this on the powerpc list, so I CC’ed >> them. > >> Also, it would be helpful to see what your /etc/yaboot.conf looks like. > > boot="/dev/disk/by-id/ata-ST340015A_5LA13M03-part13" > device=/pci@f4000000/ata-6@d/@1 > partition=11 > root="UUID=3d6512d0-21d2-410f-bf71-2fb2dbdb94e5" > timeout=300 > delay=16 > install=/usr/lib/yaboot/yaboot > magicboot=/usr/lib/yaboot/ofboot > enablecdboot > macosx="/dev/disk/by-id/ata-ST340015A_5LA13M03-part10" > > image=/boot/vmlinux > label=curKernelShell > alias=3 > read-only > initrd=/boot/initrd.img > append="splash=0 ipv6.disable=1 net.ifnames=0 noresume vga=791 > video=1024x768 3" > > image=/boot/vmlinux.old > label=prvKernel > alias=p > read-only > initrd=/boot/initrd.img.old > append="splash=0 ipv6.disable=1 net.ifnames=0 noresume vga=791 > video=1280x800" > > image=/boot/vmlinux > label=GUIcurKernel > alias=5 > read-only > initrd=/boot/initrd.img > append="splash=0 ipv6.disable=1 net.ifnames=0 noresume vga=791 > video=1024x768 5" > > image=/boot/vmlinux > label=NoSMP > alias=s > read-only > initrd=/boot/initrd.img > append="splash=0 ipv6.disable=1 net.ifnames=0 noresume vga=791 > video=1024x768 5" > > macosx=/dev/hda10 > -- > "Wisdom is supreme; therefore get wisdom. Whatever else you > get, get wisdom." Proverbs 4:7 (New Living Translation) > > Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! > > Felix Miata *** http://fm.no-ip.com/ For what it’s worth, here is the /etc/yaboot.conf on my PowerMac G5 that has both OSX and Debian Sid rbthomas@kmac:~$ cat /etc/yaboot.conf ## yaboot.conf generated by debian-installer ## ## run: "man yaboot.conf" for details. Do not make changes until you have!! ## see also: /usr/share/doc/yaboot/examples for example configurations. ## ## For a dual-boot menu, add one or more of: ## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ boot="/dev/disk/by-id/ata-WDC_WD2500JD-41HBC0_WD-WCAL74658375-part2" device=/ht@0,f2000000/pci@5/k2-sata-root@c/@0/@0 partition=3 root="/dev/mapper/kmac--vg-root" timeout=50 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot macosx=/ht@0,f2000000/pci@5/k2-sata-root@c/@1/@0:3 enablecdboot image=/vmlinux label=Linux read-only initrd=/initrd.img image=/vmlinux.old label=old read-only initrd=/initrd.img.old
