Package: hplip Version: 3.10.6-1 Severity: normal When my HP6110 Multifunction device is in Stand-By Mode, a connection for scanning is not possible. I have to switch off and on again to make it work.
Device is connected through USB, but also attachable via NET Protocol. Neither of them work. -- Package-specific info: warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.) warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. HP Linux Imaging and Printing System (ver. 3.10.6) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux rocket2 2.6.32-5-amd64 #1 SMP Fri Sep 17 21:50:19 UTC 2010 x86_64 GNU/Linux Distribution: debian testing Checking Python version... OK, version 2.6.6 installed Checking PyQt 4.x version... OK, version 4.7.3 installed. Checking for CUPS... Status: scheduler is running error_log is set to level: debug Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.1 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: CUPS DDK - CUPS driver development kit... Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: PolicyKit - Administrative policy framework... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... OK, found. Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.10.6 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.10.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.10.6.15 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: # hplip.state - HPLIP runtime persistent variables. [plugin] installed=0 eula=0 Current contents of '~/.hplip/hplip.conf' fiwarning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. error: Unable to communicate with device (code=12): hp:/par/DESKJET_690C?device=/dev/parport0 error: Device not found error: Communication status: Failed error: User needs to be member of group 'lpadmin' to manage printers. error: 3 errors and/or warnings. le: [last_used] printer_name = OfficeJet_6100 working_dir = . device_uri = "hp:/par/DESKJET_690C?device=/dev/parport0" [commands] scan = /usr/bin/xsane -V %SANE_URI% [installation] version = 3.10.6.15 date_time = 09/29/10 18:11:05 [settings] systray_messages = 0 systray_visible = 0 [fax] email_address = [email protected] voice_phone = +49 7389 90297 [refresh] rate = 30 enable = false type = 1 [polling] enable = false device_list = interval = 5 -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ------------------------ hp:/usb/OfficeJet_6100_Series?se HP OfficeJet 6100 Series rial=MY47SJ33W22R --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- C5750 ----- Type: Unknown Device URI: socket://192.168.178.23 PPD: /etc/cups/ppd/C5750.ppd PPD Description: Oki C5750 Foomatic/Postscript (recommended) Printer status: printer C5750 is idle. enabled since Tue Sep 28 14:12:47 2010 HP_DESKJET_690C --------------- Type: Printer Device URI: hp:/par/DESKJET_690C?device=/dev/parport0 PPD: /etc/cups/ppd/HP_DESKJET_690C.ppd PPD Description: HP DeskJet 694C Foomatic/pcl3 Printer status: printer HP_DESKJET_690C is idle. enabled since Sat Sep 12 18:42:44 2009 OfficeJet_6100 -------------- Type: Printer Device URI: hp:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R PPD: /etc/cups/ppd/OfficeJet_6100.ppd PPD Description: HP Officejet 6100 Series, hpcups 3.10.6 Printer status: printer OfficeJet_6100 is idle. enabled since Mon Jul 26 11:25:02 2010 Communication status: Good OfficeJet_6100_fax ------------------ Type: Fax Device URI: hpfax:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R PPD: /etc/cups/ppd/OfficeJet_6100_fax.ppd PPD Description: HP Fax hpcups Printer status: printer OfficeJet_6100_fax is idle. enabled since Mon Jul 26 11:11:19 2010 Communication status: Good ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... device `net:localhost:hpaio:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R' is a Hewlett-Packard OfficeJet_6100_Series all-in-one device `hpaio:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R' is a Hewlett-Packard OfficeJet_6100_Series all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... HP Device 0x2d11 at 002:002: Device URI: hp:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R Device node: /dev/bus/usb/002/002 Mode: 0664 getfacl: Removing leading '/' from absolute path names # file: dev/bus/usb/002/002 # owner: root # group: lp user::rw- user:wolfgang:rw- group::rw- mask::rw- other::r-- --------------- | USER GROUPS | --------------- wolfgang lp dialout cdrom floppy audio video plugdev scanner netdev powerdev User member of group 'lp'. Enables print/ scan/ fax. ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages hplip depends on: ii adduser 3.112 add and remove users and groups ii coreutils 8.5-1 GNU core utilities ii cups 1.4.4-3 Common UNIX Printing System(tm) - ii cups-client 1.4.4-3 Common UNIX Printing System(tm) - ii hplip-cups 3.10.6-1 HP Linux Printing and Imaging - CU ii hplip-data 3.10.6-1 HP Linux Printing and Imaging - da ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libcups2 1.4.4-3 Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst ii libhpmud0 3.10.6-1 HP Multi-Point Transport Driver (h ii libsane 1.0.21-4 API library for scanners ii libsane-hpaio 3.10.6-1 HP SANE backend for multi-function ii libssl0.9.8 0.9.8o-2 SSL shared libraries ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip ii policykit-1 0.96-3 framework for managing administrat ii python 2.6.5-13 interactive high-level object-orie ii python-dbus 0.83.1-1 simple interprocess messaging syst ii python-imaging 1.1.7-2 Python Imaging Library ii python-pexpect 2.3-1 Python module for automating inter ii python-support 1.0.10 automated rebuilding support for P Versions of packages hplip recommends: ii avahi-daemon 0.6.27-2 Avahi mDNS/DNS-SD daemon ii sane-utils 1.0.21-4 API library for scanners -- utilit Versions of packages hplip suggests: ii gtklp 1.2.7-2.1 printing tool for CUPS on the GNOM pn hplip-doc <none> (no description available) ii hplip-gui 3.10.6-1 HP Linux Printing and Imaging - GU ii python-notify 0.1.1-2+b2 Python bindings for libnotify -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
