Your message dated Tue, 10 Dec 2013 15:22:35 +0100
with message-id <1654536.Vln0eoIIpn@gyllingar>
and subject line Re: cups: parallel:/dev/usb/lp0 consumes 100% cpu and never
finishes
has caused the Debian Bug report #659736,
regarding cups: parallel:/dev/usb/lp0 consumes 100% cpu and never finishes
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
659736: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=659736
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: cups
Version: 1.5.2-3
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
I am trying to print both from
via samba from a remote machinee
locally via lpr
* What exactly did you do (or not do) that was effective (or ineffective)?
I noticed that the backend process parallel:/dev/usb/lp0 never finished and
consumes 100%. That means that the queue is never empty.
If I print locally the output the first print is ok. However since the
backend does not finish the spool does not empty so all subsequent prints
are prohibited.
If I print from samba not even the first print gets out. The backend process
simply consumes 100% (doing polling as strace revealed) in both cases.
*** End of the template - remove these lines ***
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages cups depends on:
ii adduser 3.113+nmu1
ii bc 1.06.95-2+b1
ii cups-client 1.5.2-3
ii cups-common 1.5.2-3
ii cups-filters 1.0~b1-3
ii cups-ppdc 1.5.2-3
ii debconf [debconf-2.0] 1.5.41
ii ghostscript 9.05~dfsg-2
ii libavahi-client3 0.6.30-6
ii libavahi-common3 0.6.30-6
ii libc6 2.13-26
ii libcups2 1.5.2-3
ii libcupscgi1 1.5.2-3
ii libcupsimage2 1.5.2-3
ii libcupsmime1 1.5.2-3
ii libcupsppdc1 1.5.2-3
ii libdbus-1-3 1.4.16-1
ii libgcc1 1:4.6.2-14
ii libgnutls26 2.12.16-1
ii libgssapi-krb5-2 1.10+dfsg~beta1-2
ii libkrb5-3 1.10+dfsg~beta1-2
ii libldap-2.4-2 2.4.28-1.1
ii libpam0g 1.1.3-7
ii libpaper1 1.1.24+nmu1
ii libslp1 1.2.1-9
ii libstdc++6 4.6.2-14
ii libusb-1.0-0 2:1.0.9~rc3-3
ii lsb-base 3.2-28.1
ii poppler-utils 0.16.7-3
ii procps 1:3.3.2-3
ii ssl-cert 1.0.28
Versions of packages cups recommends:
ii avahi-daemon 0.6.30-6
ii colord 0.1.16-2
ii foomatic-filters 4.0.12-1
ii ghostscript-cups 9.05~dfsg-2
ii printer-driver-gutenprint [cups-driver-gutenprint] 5.2.7-5
Versions of packages cups suggests:
ii cups-bsd 1.5.2-3
ii cups-pdf <none>
ii foomatic-db 20120212-1
ii hplip 3.11.12-2
ii smbclient 2:3.6.3-1
ii udev 175-3
-- Configuration Files:
/etc/cups/cupsd.conf changed:
LogLevel warn
MaxLogSize 0
SystemGroup lpadmin
Listen *:631
Listen /var/run/cups/cups.sock
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
DefaultAuthType Basic
DefaultEncryption IfRequested
<Location />
allow @LOCAL
Order allow,deny
</Location>
<Location /admin>
allow @LOCAL
Order allow,deny
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
allow @LOCAL
Order allow,deny
</Location>
<Policy default>
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs
Set-Job-Attributes Create-Job-Subscription Renew-Subscription
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class
CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs
CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Policy authenticated>
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs
Set-Job-Attributes Create-Job-Subscription Renew-Subscription
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class
CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs
CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
/etc/modprobe.d/blacklist-cups-usblp.conf changed:
-- debconf information:
cupsys/raw-print: true
cupsys/backend: ipp, lpd, socket, usb, snmp, dnssd
--- End Message ---
--- Begin Message ---
Version: 1.0.5-1
Le jeudi, 15 mars 2012, 12.10:40 Brian Potkin a écrit :
> reassign 659736 cups-filters
> thanks
>
> On Thu 15 Mar 2012 at 10:19:09 +0200, [email protected] wrote:
> > Hi,
> >
> > I can confirm that it works for my setup.
>
> Splendid!
I think this bug has been fixed by the 1.0.5-1 upload ("parallel
backend: Break infinite loop (LP: #936647)").
Please re-open if this is still an issue.
Cheers,
OdyX
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
