Oops ... I was convinced that I had already done it, but I hadn't. Sorry, now it works, please close bug 864930 (not sure I can do that)
Paolo On Sat, Jun 17, 2017 at 8:49 PM, Brian Potkin <[email protected]> wrote: > On Sat 17 Jun 2017 at 16:41:55 +0200, Paolo Giannozzi wrote: > >> my MFP M125nw laser printer was perfectly working with Debian 8. After >> upgrading >> to Debian 9 unstable (now stable), the printer is automatically detected and >> everything seems to work, but nothing is printed. No obvious error message is >> issued ("There was a problem", and after I kill the print, all I see is >> "Printer state: Idle - rendering complete") >> >> HP-LaserJet-Pro-MFP-M125nw >> -------------------------- >> Type: Printer >> Device URI: hp:/usb/HP_LaserJet_Pro_MFP_M125nw?serial=CNB7H5H5S4 >> PPD: /etc/cups/ppd/HP-LaserJet-Pro-MFP-M125nw.ppd >> warning: Failed to read /etc/cups/ppd/HP-LaserJet-Pro-MFP-M125nw.ppd ppd file >> PPD Description: >> Printer status: printer HP-LaserJet-Pro-MFP-M125nw disabled since Sat Jun 10 >> 22:52:26 2017 - >> Unplugged or turned off >> error: Required plug-in status: Not installed >> [31;01merror: Unable to communicate with device (code=12): >> hp:/usb/HP_LaserJet_Pro_MFP_M125nw?serial=CNB7H5H5S4 [0m >> error: Device not found >> error: Communication status: Failed >> >> Plug-in Status >> -------------- >> error: Plug-ins need to be installed > > Install the plug-in. Report back. > > Cheers, > > Brian. -- Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche, Univ. Udine, via delle Scienze 208, 33100 Udine, Italy Phone +39-0432-558216, fax +39-0432-558222
