Package: hplip
Version: 3.22.10+dfsg0-5.1
Severity: important
Dear Maintainer,
with the transition of python3 to 3.13 on sid, bplip became uninstallable,
since it has an explicit
Depends: python3 (<< 3.13)
This forces sid users to either stall the transition (like me), to keep hplip
installed if they need it, or to uninstall hplip and be unable to reinstall it
till this dependence is fixed.
Of course, stalling the transition will, on the long run, end in dependency
hell, hence the "important" tag.
Thanks in advance, best regards
Giacomo Mulas
-- Package-specific info:
/usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat =
re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""",
re.IGNORECASE)
Saving output in log file: /home/gmulas/hp-check.log
HP Linux Imaging and Printing System (ver. 3.22.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
/home/gmulas/.themes/Mojave-Light/gtk-2.0/menubar-toolbar.rc:166: error:
invalid string constant "misc_button_label", expected valid string constant
Gtk-Message: 10:05:08.749: Failed to load module "canberra-gtk-module"
Gtk-Message: 10:05:08.750: Failed to load module "pk-gtk-module"
warning: debian-n/a version is not supported. Using debian-11 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.12.9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1 (2025-01-10)
GNU/Linux
Host: capitanata
Proc: 6.12.9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1 (2025-01-10)
GNU/Linux
Distribution: debian n/a
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro n/a version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.22.10
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 01/19/25 10:05:11
version = 3.22.10
[last_used]
device_uri = "hp:/net/HP_ColorLaserJet_MFP_M182-M185?ip=192.168.68.71"
printer_name = HP_LaserJet_MFP_M139-M142
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 2
systray_visible = 0
[upgrade]
last_upgraded_time = 1459439415
latest_available_version = 3.13.11
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 10.04.0 OK -
/home/gmulas/.themes/Mojave-Light/gtk-2.0/menubar-toolbar.rc:166: error:
invalid string constant "misc_button_label", expected valid string constant
Gtk-Message: 10:05:12.050: Failed to load module "canberra-gtk-module"
Gtk-Message: 10:05:12.050: Failed to load module "pk-gtk-module"
/home/gmulas/.themes/Mojave-Light/gtk-2.0/menubar-toolbar.rc:166: error:
invalid string constant "misc_button_label", expected valid string constant
Gtk-Message: 10:05:12.080: Failed to load module "canberra-gtk-module"
Gtk-Message: 10:05:12.080: Failed to load module "pk-gtk-module"
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.2.1 OK -
dbus DBus - Message bus system
REQUIRED - 1.16.0 OK -
policykit PolicyKit - Administrative policy framework
OPTIONAL - - OK -
network network -wget
OPTIONAL - 1.24.5 OK -
avahi-utils avahi-utils
OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library
REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - OK -
cups-image CUPS image - CUPS image development files
REQUIRED - - OK -
libpthread libpthread - POSIX threads library
REQUIRED - b'2.40' OK -
libusb libusb - USB library
REQUIRED - 1.0 OK -
sane SANE - Scanning library
REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files
REQUIRED - - MISSING 'sane-devel needs
to be installed'
libavahi-dev libavahi-dev
REQUIRED - - OK -
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 - MISSING
'libnetsnmp-devel needs to be installed'
libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 3.4.0 OK -
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.12.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.3.2 OK -
python3-xml Python XML libraries
REQUIRED - 2.6.4 OK -
python3-devel Python devel - Python development files
REQUIRED 2.2 3.12.8 OK -
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 10.4.0 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 4.2.5 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services
REQUIRED - 2.4.7 OK -
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 14.2.0 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.22.10 OK -
hpmudext IO-Extension
REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.22.10 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video2' is a Noname Integrated_Webcam_HD: Integrate virtual
device
device `v4l:/dev/video0' is a Noname Integrated_Webcam_HD: Integrate virtual
device
device `hpaio:/net/hp_laserjet_mfp_m139-m142?ip=192.168.68.66&queue=false' is a
Hewlett-Packard hp_laserjet_mfp_m139-m142 all-in-one
device `hpaio:/net/hp_colorlaserjet_mfp_m182-m185?ip=192.168.68.71&queue=false'
is a Hewlett-Packard hp_colorlaserjet_mfp_m182-m185 all-in-one
device `v4l:/dev/video2' is a Noname Integrated_Webcam_HD: Integrate virtual
device
device `v4l:/dev/video0' is a Noname Integrated_Webcam_HD: Integrate virtual
device
device `hpaio:/net/hp_laserjet_mfp_m139-m142?ip=192.168.68.66&queue=false' is a
Hewlett-Packard hp_laserjet_mfp_m139-m142 all-in-one
device `hpaio:/net/hp_colorlaserjet_mfp_m182-m185?ip=192.168.68.71&queue=false'
is a Hewlett-Packard hp_colorlaserjet_mfp_m182-m185 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_LaserJet_MFP_M140w_60C437
----------------------------
Type: Unknown
Device URI: implicitclass://HP_LaserJet_MFP_M140w_60C437/
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M140w_60C437.ppd
PPD Description: HP LaserJet MFP M139-M142, driverless, cups-filters 1.28.17
Printer status: printer HP_LaserJet_MFP_M140w_60C437 is idle. enabled since
Sun Jan 19 00:58:27 2025
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend for HP-Devices.
st28_hal
--------
Type: Unknown
Device URI: implicitclass://st28_hal/
PPD: /etc/cups/ppd/st28_hal.ppd
PPD Description: 2554ci - IPP Everywhere, driverless, cups-filters 1.28.17
Printer status: printer st28_hal disabled since Wed Jan 15 13:30:47 2025 -
No destination host name supplied by cups-browsed for printer
"st28_hal", is cups-browsed running?
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 5
Total Warnings: 2
Done.
-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (401, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.12.9-amd64 (SMP w/12 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_WARN, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.137
ii cups 2.4.10-2+b1
ii hplip-data 3.22.10+dfsg0-5.1
ii libc6 2.40-5
ii libcups2t64 2.4.10-2+b1
ii libdbus-1-3 1.16.0-1
ii libhpmud0 3.22.10+dfsg0-5.1
ii libpython3.12t64 3.12.8-5
ii libsane-hpaio 3.22.10+dfsg0-5.1
ii libsane1 1.3.1-1
ii printer-driver-hpcups 3.22.10+dfsg0-5.1
ii python3 3.12.8-1
ii python3-dbus 1.3.2-5+b4
ii python3-gi 3.50.0-4
ii python3-pexpect 4.9-3
ii python3-pil 10.4.0-1.1
ii python3-reportlab 4.2.5-1
ii sysvinit-utils [lsb-base] 3.13-1
ii wget 1.24.5-2+b1
ii xz-utils 5.6.3-1+b1
Versions of packages hplip recommends:
ii avahi-daemon 0.8-16
ii pkexec 126-2
ii polkitd 126-2
ii printer-driver-postscript-hp 3.22.10+dfsg0-5.1
ii sane-utils 1.3.1-1
Versions of packages hplip suggests:
ii hplip-doc 3.22.10+dfsg0-5.1
ii hplip-gui 3.22.10+dfsg0-5.1
ii python3-notify2 0.3.1-1
ii system-config-printer 1.5.18-3
-- no debconf information
