Your message dated Thu, 06 Feb 2025 16:20:21 +0000
with message-id <[email protected]>
and subject line Bug#1094348: fixed in hplip 3.22.10+dfsg0-6
has caused the Debian Bug report #1094348,
regarding hplip : support python 3.13
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1094348: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1094348
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: hplip
Version: 3.22.10+dfsg0-5.1
Severity: minor
Python3.13 is arriving in testing, however no version of hplip is available
(even in sid) supporting python3.13; this support would be necessary to keep up
with other packages which request python 3.13
-- Package-specific info:
/usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat =
re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""",
re.IGNORECASE)
Saving output in log file: /home/edavid/hp-check.log
HP Linux Imaging and Printing System (ver. 3.22.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-n/a version is not supported. Using debian-11 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.12.9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1 (2025-01-10)
GNU/Linux
Host: maine-ocean
Proc: 6.12.9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1 (2025-01-10)
GNU/Linux
Distribution: debian n/a
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro n/a version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.22.10
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 01/27/25 12:41:53
version = 3.22.10
[last_used]
device_uri = "hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.1.200"
printer_name = HP_Home
working_dir = /home/edavid/Downloads/hplip-3.21.8-plugin.run
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 1
systray_visible = 0
[upgrade]
last_upgraded_time = 1566416457
notify_upgrade = true
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 10.04.0 OK -
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.2.1 OK -
dbus DBus - Message bus system
REQUIRED - 1.16.0 OK -
policykit PolicyKit - Administrative policy framework
OPTIONAL - - OK -
network network -wget
OPTIONAL - 1.24.5 OK -
avahi-utils avahi-utils
OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library
REQUIRED - - MISSING 'libjpeg needs to
be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - MISSING 'cups-devel needs
to be installed'
error: cups-image CUPS image - CUPS image development files
REQUIRED - - MISSING 'cups-image needs
to be installed'
libpthread libpthread - POSIX threads library
REQUIRED - b'2.40' OK -
libusb libusb - USB library
REQUIRED - 1.0 OK -
sane SANE - Scanning library
REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files
REQUIRED - - MISSING 'sane-devel needs
to be installed'
error: libavahi-dev libavahi-dev
REQUIRED - - MISSING 'libavahi-dev
needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 - MISSING
'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 3.4.0 MISSING 'libcrypto needs
to be installed'
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.12.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.3.2 OK -
python3-xml Python XML libraries
REQUIRED - 2.6.4 OK -
python3-devel Python devel - Python development files
REQUIRED 2.2 3.12.8 OK -
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 10.4.0 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 4.2.5 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services
REQUIRED - - MISSING 'libtool needs to
be installed'
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 14.2.0 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.22.10 OK -
hpmudext IO-Extension
REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.22.10 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video0' is a Noname Integrated Camera: Integrated C virtual
device
device `hpaio:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.1.200' is a
Hewlett-Packard HP_LaserJet_Pro_MFP_M125nw all-in-one
device `v4l:/dev/video0' is a Noname Integrated Camera: Integrated C virtual
device
device `hpaio:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.1.200' is a
Hewlett-Packard HP_LaserJet_Pro_MFP_M125nw all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_Home
-------
Type: Printer
Device URI: hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.1.200
PPD: /etc/cups/ppd/HP_Home.ppd
warning: Failed to read /etc/cups/ppd/HP_Home.ppd ppd file
PPD Description:
Printer status: printer HP_Home is idle. enabled since Thu Nov 16 16:22:49 2023
[31;01merror: Unable to communicate with device (code=12):
hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.1.200[0m
[31;01merror: unable to open channel[0m
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libjpeg62-turbo-dev' package is missing/incompatible
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 12
Total Warnings: 0
Done.
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'stable-security'), (600, 'unstable'),
(500, 'stable-updates'), (500, 'proposed-updates'), (400, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.12.9-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.137
ii cups 2.4.10-2+b1
ii hplip-data 3.22.10+dfsg0-5.1
ii libc6 2.40-5
ii libcups2t64 2.4.10-2+b1
ii libdbus-1-3 1.16.0-1
ii libhpmud0 3.22.10+dfsg0-5.1
ii libpython3.12t64 3.12.8-5
ii libsane-hpaio 3.22.10+dfsg0-5.1
ii libsane1 1.3.1-1
ii lsb-base 11.6
ii printer-driver-hpcups 3.22.10+dfsg0-5.1
ii python3 3.12.8-1
ii python3-dbus 1.3.2-5+b4
ii python3-gi 3.50.0-4
ii python3-pexpect 4.9-3
ii python3-pil 10.4.0-1.1
ii python3-reportlab 4.2.5-1
ii sysvinit-utils [lsb-base] 3.13-1
ii wget 1.24.5-2+b1
ii xz-utils 5.6.3-1+b1
Versions of packages hplip recommends:
ii avahi-daemon 0.8-16
ii pkexec 126-2
ii polkitd 126-2
ii printer-driver-postscript-hp 3.22.10+dfsg0-5.1
ii sane-utils 1.3.1-1
Versions of packages hplip suggests:
pn hplip-doc <none>
ii hplip-gui 3.22.10+dfsg0-5.1
ii python3-notify2 0.3.1-1
ii system-config-printer 1.5.18-3
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: hplip
Source-Version: 3.22.10+dfsg0-6
Done: Thorsten Alteholz <[email protected]>
We believe that the bug you reported is fixed in the latest version of
hplip, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Thorsten Alteholz <[email protected]> (supplier of updated hplip package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Wed, 05 Feb 2025 18:39:02 +0100
Source: hplip
Architecture: source
Version: 3.22.10+dfsg0-6
Distribution: unstable
Urgency: medium
Maintainer: Debian Printing Team <[email protected]>
Changed-By: Thorsten Alteholz <[email protected]>
Closes: 1030095 1075069 1093485 1094348
Changes:
hplip (3.22.10+dfsg0-6) unstable; urgency=medium
.
* fix FTBFS with gcc14 (Closes: #1075069)
* add compatibility with python3.13 (Closes: #1093485)
(Closes: #1094348)
(Closes: #1030095)
(thanks a lot to Petter Reinholdtsen and Damyan Ivanov
for the patches and the merge request)
Checksums-Sha1:
ac4b8ae448254ae6e30189a100e7ab469a225d9e 3216 hplip_3.22.10+dfsg0-6.dsc
5cfc6ca60b10d682844ee80a91a836a996ed32a1 142344
hplip_3.22.10+dfsg0-6.debian.tar.xz
a20250d040c38b3dbc9b2549646c6d80ccf75095 20617
hplip_3.22.10+dfsg0-6_amd64.buildinfo
Checksums-Sha256:
a355ebd221c463bcdcd0fc5341004793566d374ca2da5d1f60a1dc190fa20c89 3216
hplip_3.22.10+dfsg0-6.dsc
d0394f50c06ed09af1ff6dd97218de0877e38ef72a24559e09d11a3b08760b95 142344
hplip_3.22.10+dfsg0-6.debian.tar.xz
3d8833112437bfdced3e285d917733a783ffd6b28f96490727a2895aefb08684 20617
hplip_3.22.10+dfsg0-6_amd64.buildinfo
Files:
971e25d4ab8db787f2a7b39fe989deb0 3216 utils optional hplip_3.22.10+dfsg0-6.dsc
4b50266d2dd314d646a516a4cb2326af 142344 utils optional
hplip_3.22.10+dfsg0-6.debian.tar.xz
5a9719a40cc8073820ee284e2d32e2ae 20617 utils optional
hplip_3.22.10+dfsg0-6_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----
iQKnBAEBCgCRFiEEYgH7/9u94Hgi6ruWlvysDTh7WEcFAmejv61fFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDYy
MDFGQkZGREJCREUwNzgyMkVBQkI5Njk2RkNBQzBEMzg3QjU4NDcTHGRlYmlhbkBh
bHRlaG9sei5kZQAKCRCW/KwNOHtYR3xmD/9ZUF/bdi09QREhM625r7xGB9Blv01Y
T5qvzcCoxOPI2iaSqQEMCJ+NcbCn8+F+GN1cC+BIUAiEFRkMQZb4EUEORzQqfLow
ofCz6+4h+pCg7DJU9TWK1YXG5z7CS7zKBteDeZyyyYflHSgRWJidvFWen55jTIMr
xYsCa6ewc7d8fpH5UG/9NkRBofPpTPu1j6TJc3JWM7kZ7CVRHq80Ssl3mmvWy9Vc
sWSqNFIxObkgf0Jqz05lKOmRAc1qyiRLMXENscfMiCGXCsBhmHYbBV4/tZwJa+Yn
UD6Fi1DrnGfgsHrWtjYgXWj5v7h8hsGyWUiHatb3CPSzqJ+Xpu/0AdHtEUe/Yhpx
x8otD1mWz7lfmf1OFaYSjoQePau5WnZwzgXf9zsc/IpHqU4v/gqBbqGufro480sf
XxhDZ1ni+suEXQ+7Me81MONmjvUT54IkGRpULDCwKHNAUXtfXr4uGnP31t4Otty2
vHCsdu+qne+Q/LvUMds+/ayClSyXHjij/aSMRfz+Ecd2AH0/d/zXg04aUMa9++ii
xVoH2aWoJpgvyWyT4paHlbNnzgHxumFC2D2XT1YF5RVeQAuG6dLrzS/g9kVXCtpM
/0pEPBvvH3h7Sm/SLpvztoXTOZsjwd/SxZANuSnX4KFLfcHaIMeZOuD1/NvYKr2O
vBQzFctuu9+1RQ==
=krX/
-----END PGP SIGNATURE-----
pgpyLd3k3iHZD.pgp
Description: PGP signature
--- End Message ---
