Package: hplip
Version: 3.22.10+dfsg0-8
Severity: normal
Dear Maintainer,
While (fresh) installing the package hplip-data I'm getting the
following error messages on the stage of its configuration:
/usr/share/hplip/base/LedmWifi.py:34: SyntaxWarning: invalid escape sequence
'\d'
http_result_pat = re.compile("""HTTP/\d.\d\s(\d+)""", re.I)
/usr/share/hplip/base/device.py:49: SyntaxWarning: invalid escape sequence '\d'
http_result_pat = re.compile("""HTTP/\d.\d\s(\d+)""", re.I)
/usr/share/hplip/base/g.py:304: SyntaxWarning: invalid escape sequence '\|'
spinner = "\|/-\|/-"
/usr/share/hplip/base/g.py:354: SyntaxWarning: invalid escape sequence '\d'
m = re.search('python(\d(\.\d){0,2})', ext_path) #get the python
version where the .so file is found
/usr/share/hplip/base/imagesize.py:186: SyntaxWarning: invalid escape sequence
'\#'
re.compile('\#define\s+\S+\s+\d+') : ('image/x-xbitmap', xbmsize),
/usr/share/hplip/base/imagesize.py:187: SyntaxWarning: invalid escape sequence
'\/'
re.compile('\/\* XPM \*\/') : ('image/x-xpixmap', xpmsize),
/usr/share/hplip/base/imagesize.py:189: SyntaxWarning: invalid escape sequence
'\*'
re.compile('^II\*\x00') : ('image/tiff', tiffsize),
/usr/share/hplip/base/logger.py:439: SyntaxWarning: invalid escape sequence '\<'
elem_start = re.findall("(\<\W{0,1}\w+) ?", line)[0]
/usr/share/hplip/base/logger.py:440: SyntaxWarning: invalid escape sequence '\]'
elem_finished = re.findall("([?|\]\]]*\>)", line)[0]
/usr/share/hplip/base/logger.py:442: SyntaxWarning: invalid escape sequence '\S'
attrs = re.findall("(\S*?\=\".*?\")", line)
/usr/share/hplip/base/models.py:37: SyntaxWarning: invalid escape sequence '\d'
pat_prod_num = re.compile("""(\d+)""", re.I)
/usr/share/hplip/base/models.py:428: SyntaxWarning: invalid escape sequence '\d'
re.compile('^r(\d+)-agent(\d+)-kind', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:429: SyntaxWarning: invalid escape sequence '\d'
re.compile('^r(\d+)-agent(\d+)-type', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:430: SyntaxWarning: invalid escape sequence '\d'
re.compile('^r(\d+)-agent(\d+)-sku', re.IGNORECASE) : TYPE_STR,
/usr/share/hplip/base/models.py:431: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-desc', re.IGNORECASE) : TYPE_STR,
/usr/share/hplip/base/models.py:432: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-virgin', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:433: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-dvc', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:434: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-kind', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:435: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-type', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:436: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-id', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:437: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-hp-ink', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:438: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-health-desc', re.IGNORECASE) : TYPE_STR,
/usr/share/hplip/base/models.py:439: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-health$', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:440: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-known', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:441: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-level', re.IGNORECASE) : TYPE_INT,
/usr/share/hplip/base/models.py:442: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-ack', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:443: SyntaxWarning: invalid escape sequence '\d'
re.compile('^agent(\d+)-sku', re.IGNORECASE) : TYPE_STR,
/usr/share/hplip/base/models.py:444: SyntaxWarning: invalid escape sequence '\d'
re.compile('^in-tray(\d+)', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:445: SyntaxWarning: invalid escape sequence '\d'
re.compile('^out-tray(\d+)', re.IGNORECASE) : TYPE_BOOL,
/usr/share/hplip/base/models.py:446: SyntaxWarning: invalid escape sequence '\d'
re.compile('^model(\d+)', re.IGNORECASE) : TYPE_STR,
/usr/share/hplip/base/password.py:212: SyntaxWarning: invalid escape sequence
'\['
cb = cb.replace("[", "\[")
/usr/share/hplip/base/password.py:213: SyntaxWarning: invalid escape sequence
'\]'
cb = cb.replace("]", "\]")
/usr/share/hplip/base/queues.py:48: SyntaxWarning: invalid escape sequence '\*'
NICKNAME_PATTERN = re.compile(b'''\*NickName:\s*\"(.*)"''', re.MULTILINE)
/usr/share/hplip/base/status.py:1335: SyntaxWarning: invalid escape sequence
'\s'
pjl_code_pat = re.compile("""^CODE\s*=\s*(\d.*)$""", re.IGNORECASE)
/usr/share/hplip/base/tui.py:220: SyntaxWarning: invalid escape sequence '\|'
self.spinner = "\|/-\|/-*"
/usr/share/hplip/base/utils.py:150: SyntaxWarning: invalid escape sequence '\w'
lis = ((re.findall('SystemGroup [\w* ]*',fp.read()))[0].replace('SystemGroup
','')).split(' ')
/usr/share/hplip/base/utils.py:1584: SyntaxWarning: invalid escape sequence '\*'
USAGE_LOGGING2 = ("", "<level>: none, info\*, error, warn, debug
(\*default)", "option", False)
/usr/share/hplip/base/utils.py:1592: SyntaxWarning: invalid escape sequence '\*'
USAGE_BUS2 = ("", "<bus>: cups\*, usb\*, net, bt, fw, par\* (\*defaults)
(Note: bt and fw not supported in this release.)", 'option', False)
/usr/share/hplip/base/utils.py:1598: SyntaxWarning: invalid escape sequence '\*'
USAGE_STD_NOTES2 = ("If -p\* is specified, the default CUPS printer will be
used.", "", "note", False)
/usr/share/hplip/base/utils.py:1826: SyntaxWarning: invalid escape sequence '\-'
log.info(".SH NAME\n%s \- %s" % (crumb, title))
/usr/share/hplip/base/utils.py:1925: SyntaxWarning: invalid escape sequence '\w'
return re.sub("&#?\w+;", fixup, text)
/usr/share/hplip/base/utils.py:1978: SyntaxWarning: invalid escape sequence '\d'
pat=re.compile('''(\d{1,})([a-z]{1,})''')
/usr/share/hplip/check.py:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat =
re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""",
re.IGNORECASE)
/usr/share/hplip/fax/ledmfax.py:46: SyntaxWarning: invalid escape sequence '\d'
http_result_pat = re.compile(b"""HTTP/\d.\d\s(\d+)""", re.I)
/usr/share/hplip/fax/soapfax.py:44: SyntaxWarning: invalid escape sequence '\d'
http_result_pat = re.compile("""HTTP/\d.\d\s(\d+)""", re.I)
/usr/share/hplip/installer/dcheck.py:35: SyntaxWarning: invalid escape sequence
'\d'
ver1_pat = re.compile("""(\d+\.\d+\.\d+)""", re.IGNORECASE)
/usr/share/hplip/installer/dcheck.py:36: SyntaxWarning: invalid escape sequence
'\d'
ver_pat = re.compile("""(\d+\.\d+)""", re.IGNORECASE)
/usr/share/hplip/installer/dcheck.py:360: SyntaxWarning: invalid escape
sequence '\d'
xsane_ver_pat =re.compile('''xsane-(\d{1,}\.\d{1,}).*''')
/usr/share/hplip/makeuri.py:49: SyntaxWarning: invalid escape sequence '\*'
("To specify the port on a multi-port JetDirect:", "-p<port> or --port=<port>
(Valid values are 1\*, 2, and 3. \*default)", "option", False),
/usr/share/hplip/prnt/cups.py:170: SyntaxWarning: invalid escape sequence '\s'
pat_cups_error_log =
re.compile("""^loglevel\s?(debug|debug2|warn|info|error|none)""", re.I)
/usr/share/hplip/probe.py:45: SyntaxWarning: invalid escape sequence '\*'
("", "<bus>: cups, usb\*, net, bt, fw, par (\*default) (Note: bt and fw not
supported in this release.)", "option", False),
/usr/share/hplip/probe.py:49: SyntaxWarning: invalid escape sequence '\*'
("", "<filter list>: comma separated list of one or more of: scan, pcard,
fax, copy, or none\*. (\*none is the default)", "option", False),
/usr/share/hplip/scan.py:254: SyntaxWarning: invalid escape sequence '\*'
("Scan mode:", "-m<mode> or --mode=<mode>. Where <mode> is 'gray'\*, 'color'
or 'lineart'.", "option", False),
/usr/share/hplip/scan.py:271: SyntaxWarning: invalid escape sequence '\*'
("", "where <units> is 'mm'\*, 'cm', 'in', 'px', or 'pt' ('mm' is default).",
"option", False),
/usr/share/hplip/setup.py:82: SyntaxWarning: invalid escape sequence '\*'
("To specify the port on a multi-port JetDirect:", "--port=<port> (Valid
values are 1\*, 2, and 3. \*default)", "option", False),
/usr/share/hplip/setup.py:86: SyntaxWarning: invalid escape sequence '\*'
("Type of queue(s) to install:", "-t<typelist> or --type=<typelist>.
<typelist>: print*, fax\* (\*default) (-i mode only)", "option", False),
Regards,
Lev Lamberov
-- Package-specific info:
/usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat =
re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""",
re.IGNORECASE)
Saving output in log file: /home/dogsleg/hp-check.log
HP Linux Imaging and Printing System (ver. 3.22.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz
or .run) to determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or
an already built HPLIP supplied tarball has the proper dependencies installed
to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases
(both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-n/a version is not supported. Using debian-11 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.12.19-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.19-1 (2025-03-16)
GNU/Linux
Host: shakva
Proc: 6.12.19-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.19-1 (2025-03-16)
GNU/Linux
Distribution: debian n/a
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro n/a version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.22.10
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 04/01/25 16:58:29
version = 3.22.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 10.05.0 OK -
error: xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 - MISSING 'xsane needs to
be installed'
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.2.1 OK -
error: dbus DBus - Message bus system
REQUIRED - 1.16.2 MISSING 'DBUS may not be
installed or not running'
policykit PolicyKit - Administrative policy framework
OPTIONAL - - OK -
network network -wget
OPTIONAL - 1.25.0 OK -
avahi-utils avahi-utils
OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library
REQUIRED - - MISSING 'libjpeg needs to
be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - MISSING 'cups-devel needs
to be installed'
error: cups-image CUPS image - CUPS image development files
REQUIRED - - MISSING 'cups-image needs
to be installed'
libpthread libpthread - POSIX threads library
REQUIRED - b'2.41' OK -
error: libusb libusb - USB library
REQUIRED - 1.0 MISSING 'libusb needs to
be installed'
sane SANE - Scanning library
REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files
REQUIRED - - MISSING 'sane-devel needs
to be installed'
error: libavahi-dev libavahi-dev
REQUIRED - - MISSING 'libavahi-dev
needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 - MISSING
'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 3.4.1 MISSING 'libcrypto needs
to be installed'
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.13.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.4.0 OK -
python3-xml Python XML libraries
REQUIRED - 2.7.1 OK -
error: python3-devel Python devel - Python development files
REQUIRED 2.2 3.13.2 MISSING 'python3-devel
needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 11.1.0 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 4.3.1 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services
REQUIRED - - MISSING 'libtool needs to
be installed'
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 14.2.0 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.22.10 OK -
hpmudext IO-Extension
REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.22.10 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
error: User exit
Done.
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-security'), (500, 'unstable'),
(500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.12.19-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_WARN, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.149
ii cups 2.4.10-2+b1
ii hplip-data 3.22.10+dfsg0-8
ii libc6 2.41-6
ii libcups2t64 2.4.10-2+b1
ii libdbus-1-3 1.16.2-2
ii libhpmud0 3.22.10+dfsg0-8
ii libpython3.13 3.13.2-2
ii libsane-hpaio 3.22.10+dfsg0-8
ii libsane1 1.3.1-3
ii printer-driver-hpcups 3.22.10+dfsg0-8
ii python3 3.13.2-2
ii python3-dbus 1.4.0-1
ii python3-gi 3.50.0-4+b1
ii python3-pexpect 4.9-3
ii python3-pil 11.1.0-5+b1
ii python3-reportlab 4.3.1-1
ii sysvinit-utils [lsb-base] 3.14-4
ii wget 1.25.0-2
ii xz-utils 5.6.4-1
Versions of packages hplip recommends:
ii avahi-daemon 0.8-16
ii pkexec 126-2
ii polkitd 126-2
ii printer-driver-postscript-hp 3.22.10+dfsg0-8
ii sane-utils 1.3.1-3
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
ii python3-notify2 0.3.1-1
ii system-config-printer 1.5.18-4
-- no debconf information
