Hello, it is probably too late to get an update of rt2x00-source into etch. The etch works very unreliable with my D-link DWL-G122 B1 usb WLAN stick, whereas the sid version (compiled against the etch kernel) works very well. If it cannot go into etch it is at least documented...
[EMAIL PROTECTED]:~/tmp.nobackup/mac$ apt-cache show rt2x00-source Package: rt2x00-source Priority: extra Section: net Installed-Size: 292 Maintainer: Debian Ralink packages maintainers <[EMAIL PROTECTED]> Architecture: all Source: rt2x00 Version: 0cvs20070219-2 Depends: debhelper (>= 4.0), module-assistant Filename: pool/main/r/rt2x00/rt2x00-source_0cvs20070219-2_all.deb Size: 236318 MD5sum: f3ead2a26ae762eaf6fc094e333c054d SHA1: ff6a643f31c517c4f3a7d6e8d45401b6e4175644 SHA256: ef0ae73a36874caa700e1c85e0acdfbfe078700c74c829abf7971b1c7f9d40b6 Description: RT2x00 wireless network drivers source This package provides the source code of the Linux drivers for wireless network cards using the Ralink RT2x00 chips. It is a complete rewrite of the RT2400/RT2500/RT2570 drivers, it uses the standard iw* configuration tools, and it aims to be integrated in the kernel tree. . In order to compile the kernel modules you need the kernel sources (or the kernel-headers for the kernel-image packages from Debian). For compile instructions look into /usr/share/doc/rt2x00-source/README.Debian or simply use the module-assistant utility. . WARNING: This driver is still experimental, it only works for a few cards. You will need a 2.6.17 or later kernel to use it. . Homepage: http://rt2x00.serialmonkey.com/ Package: rt2x00-source Priority: extra Section: net Installed-Size: 324 Maintainer: Aurelien Jarno <[EMAIL PROTECTED]> Architecture: all Source: rt2x00 Version: 0cvs20060928-1 Depends: debhelper (>= 4.0), module-assistant Filename: pool/main/r/rt2x00/rt2x00-source_0cvs20060928-1_all.deb Size: 305930 MD5sum: 5e021755d6ef893e6dd9700eb06fa564 SHA1: 532a356ecf98b7d11207ea1e76c1dc37253ed647 SHA256: d8cc8a02f7eb743b59940ab3fe74f62326c7fe589ffc62aea0277358f800b827 Description: RT2x00 wireless network drivers source This package provides the source code of the Linux drivers for wireless network cards using the Ralink RT2x00 chips. It is a complete rewrite of the RT2400/RT2500/RT2570 drivers, it uses the standard iw* configuration tools, and it aims to be integrated in the kernel tree. . In order to compile the kernel modules you need the kernel sources (or the kernel-headers for the kernel-image packages from Debian). For compile instructions look into /usr/share/doc/rt2x00-source/README.Debian or simply use the module-assistant utility. . WARNING: This driver is still experimental, it only works for a few cards. You will need a 2.6.17 or later kernel to use it. . Homepage: http://rt2x00.serialmonkey.com/ [EMAIL PROTECTED]:~/tmp.nobackup/mac$ apt-cache policy rt2x00-source rt2x00-source: Installiert:(keine) Mögliche Pakete:0cvs20060928-1 Versions-Tabelle: 0cvs20070219-2 0 300 http://ftp.de.debian.org sid/main Packages 0cvs20060928-1 0 600 http://ftp.de.debian.org etch/main Packages [EMAIL PROTECTED]:~/tmp.nobackup/mac$ [EMAIL PROTECTED]:~$ /usr/sbin/lsusb Bus 001 Device 006: ID 2001:3c00 D-Link Corp. [hex] DWL-G122 802.11g rev. B1 [ralink] Thanks, Rainer -- Rainer Dorsch Lärchenstr. 6 D-72135 Dettenhausen 07032-359190 email: [EMAIL PROTECTED] jabber: [EMAIL PROTECTED] GPG Fingerprint: 5966 C54C 2B3C 42CC 1F4F 8F59 E3A8 C538 7519 141E Full GPG key: http://pgp.mit.edu/
