В сообщении от Среда 21 апреля 2010 19:02:07 автор Andrey Melnikoff написал: > Иван Лох <[email protected]> wrote: > > On Wed, Apr 21, 2010 at 12:18:01AM +0400, Andrey Melnikoff wrote: > > > Увы, rtorrent унылое г-но. По крайней мере - на быстрых каналах. deluge > > > у меня отдает со скоростью под 7 мегабит, rtorrent никогда не выжимал > > > больше 1. Ну и с закачкай - та-же хистори. > > > > У всех же качает и 7 мегабит и 17. Только канал давай. > > Специально проверил - поставил rt 0.8.6, librt 0.12.6 и качал iso'шки > Ubuntu. > > rtorrent на 50% разогнался до 4 мегабит, и больше не поднимался. > deluge - на 25% разогнался до 7 мегабит, к 80% набрал 9 мегабит, так и > закончил. Либо дефолтные настройки rtorrent плохи, либо что-то другое. Для сравнения скоростей rtorrent и ktorrent по очереди поставил на закачку http://rutracker.org/forum/viewtopic.php?t=2254842 (выбрал случайно, просто чтобы раздающих много было) Оба, и rtorrent и ktorrent после минутного "разгона" показали 9 мегабит. Настройки rtorrent во вложении. > > Да - из 300 пиров - только один раздает rtorrent'ом, всей остальное - > uTorrent, Azeurus, Transmission, Deluge (в порядке убывания). Это тут вообще причем? Пользователей Линукс на десктопах пару процентов, из них консольные приблуды любит только какая-то часть. > > Ы? Доктор, что я делаю не так ? Где засилие быстрого rtorrent'a на > раздачах? Ваша же проблема. Вам и решать. Я думаю как-нибудь буду продолжать жить дальше даже если rtorrent вообще у вас работать перестанет. :) >
# This is an example resource file for rTorrent. Copy to # ~/.rtorrent.rc and enable/modify the options as needed. Remember to # uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent. #min_peers = 40 max_peers = 1000 # Same as above but for seeding completed torrents (-1 = same as downloading) #min_peers_seed = 10 max_peers_seed = 1000 # Maximum number of simultanious uploads per torrent. max_uploads = 1000 # Global upload and download rate in KiB. "0" for unlimited. download_rate = 0 upload_rate = 0 # Default directory to save the downloaded torrents. directory = ./MyDownloads/ # Default session directory. Make sure you don't run multiple instance # of rtorrent using the same session directory. Perhaps using a # relative path? session = ./session # Watch a directory for new torrents, and stop those that have been # deleted. schedule = watch_directory,5,5,load_start=./watch/*.torrent #schedule = untied_directory,5,5,stop_untied= # Close torrents when diskspace is low. #schedule = low_diskspace,5,60,close_low_diskspace=100M # Stop torrents when reaching upload ratio in percent, # when also reaching total upload in bytes, or when # reaching final upload ratio in percent. # example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0 #schedule = ratio,60,60,stop_on_ratio=200,200M,2000 # The ip address reported to the tracker. #ip = 127.0.0.1 #ip = rakshasa.no # The ip address the listening socket and outgoing connections is # bound to. #bind = 127.0.0.1 #bind = rakshasa.no # Port range to use for listening. port_range = 6890-6900 # Start opening ports at a random position within the port range. #port_random = no # Check hash for finished torrents. Might be usefull until the bug is # fixed that causes lack of diskspace not to be properly reported. check_hash = yes # Set whetever the client should try to connect to UDP trackers. use_udp_trackers = yes dht = auto # UDP port to use for DHT. # dht_port = 6881 peer_exchange=yes # Alternative calls to bind and ip that should handle dynamic ip's. #schedule = ip_tick,0,1800,ip=rakshasa #schedule = bind_tick,0,1800,bind=rakshasa # Encryption options, set to none (default) or any combination of the following: # allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext # # The example value allows incoming encrypted connections, starts unencrypted # outgoing connections but retries with encryption if they fail, preferring # plaintext to RC4 encryption after the encrypted handshake # #encryption = allow_incoming, try_outgoing encryption = allow_incoming,enable_retry,prefer_plaintext # # Do not modify the following parameters unless you know what you're doing. # # Hash read-ahead controls how many MB to request the kernel to read # ahead. If the value is too low the disk may not be fully utilized, # while if too high the kernel might not be able to keep the read # pages in memory thus end up trashing. #hash_read_ahead = 10 # Interval between attempts to check the hash, in milliseconds. #hash_interval = 100 # Number of attempts to check the hash while using the mincore status, # before forcing. Overworked systems might need lower values to get a # decent hash checking rate. #hash_max_tries = 10 # Max number of files to keep open simultaniously. #max_open_files = 128 # Number of sockets to simultaneously keep open. #max_open_sockets = <no default> # Example of scheduling commands: Switch between two ip's every 5 # seconds. #schedule = "ip_tick1,5,10,ip=torretta" #schedule = "ip_tick2,10,10,ip=lampedusa" # Remove a scheduled event. #schedule_remove = "ip_tick1"
