Hi, Denis. 
В этой версии синаптика они поломали хал и полностью перешли на xorg.conf.d. 
Приведу свой конфиг /etc/X11/xorg.conf.d/10-synaptics.conf
---------8<--------------
Section "InputClass"
        Identifier "touchpad"
        Driver "synaptics"
        MatchIsTouchpad "on"
        Option "TapButton1" "1"
        Option "VertEdgeScroll" "1"
        Option "VertTwoFingerScroll" "1"
        Option "HorizEdgeScroll" "1"
        Option "HorizTwoFingerScroll" "1"
EndSection
---------8<--------------

Попробуй создать что-то похожее и закомментировать все настройки в xorg.conf

Заранее предупреждаю, что иксы могут просто не запуститься, если в .conf-файле 
будет ошибка. 

Четверг 06 мая 2010 14:44:02 you wrote:
> да, возможно кого-то ввёл в заблуждение цитатой из xorg.conf с
>  неиспользуемыми секциями. да, у меня на самом деле HAL используется.
> 
> всё подчистил, вот полностью xorg.conf:
> 
> Section "Files"
> #     FontPath        "unix/:7100"                    # local font server
>       # if the local font server has problems, we can fall back on these
>       FontPath        "/usr/share/fonts/X11/misc"
>       FontPath        "/usr/lib/X11/fonts/misc"
>       FontPath        "/usr/share/fonts/X11/cyrillic"
>       FontPath        "/usr/lib/X11/fonts/cyrillic"
>       FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
>       FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
>       FontPath        "/usr/share/fonts/X11/Type1"
>       FontPath        "/usr/lib/X11/fonts/Type1"
>       FontPath        "/usr/lib/X11/fonts/Speedo"
>       FontPath        "/usr/share/fonts/X11/100dpi"
>       FontPath        "/usr/lib/X11/fonts/100dpi"
>       FontPath        "/usr/share/fonts/X11/75dpi"
>       FontPath        "/usr/lib/X11/fonts/75dpi"
>       FontPath        "/usr/share/fonts/truetype"
>       FontPath        "/usr/share/fonts/type1"
> EndSection
> 
> Section "Module"
> #         Load   "extmod"
>          Load   "dbe"
> #       Load   "dri"
> #       Load   "glx"
>          Load   "freetype"
>          Load   "type1"
>          Load   "synaptics"
> 
> #     Load    "bitmap"
> #     Load    "dbe"
> #     Load    "ddc"
> #     Load    "dri"
> #     Load    "extmod"
> #     Load    "freetype"
> #     Load    "glx"
> #     Load    "int10"
> #     Load    "pex5"
> #     Load    "record"
> #     Load    "type1"
> #     Load    "vbe"
> #     Load    "xie"
> EndSection
> 
> Section "Device"
> 
>       Identifier      "videocard"
>       Driver          "sis"
>       Screen          0
>       Option "MetaModes"                "1024x768,1024x768"
> 
>       Option "BlankTime"  "0"
>       Option "StandbyTime"  "0"
> 
> #     Option "CursorShadow" "no"
> #     Option "CursorShadowAlpha" "55"
> #     Option "CursorShadowXOffset" "5"
> #     Option "CursorShadowYOffset" "12"
> EndSection
> 
> Section "Monitor"
>       Identifier      "LCD"
>       HorizSync       30-84
>       VertRefresh     60
>       DisplaySize     304 229
>       Option "DPMS"  "yes"
> EndSection
> 
> Section "Monitor"
>       Identifier      "TV-Out"
>       HorizSync       30-50
>       VertRefresh     60
>       Option          "TVStandard"    "PAL-B"
> EndSection
> 
> # Enable the composite extension
> 
> Section "Extensions"
> #    Option "Composite" "Enable"
> ##    Option "RENDER"    "true"
> EndSection
> 
> Section "Screen"
>       Identifier      "Screen0"
>       Device          "videocard"
>       Monitor         "LCD"
>       Option          "NoLogo"        "true"
> #     DefaultDepth    24
> #     for 3D with SiS:
>       DefaultDepth    16
>       SubSection "Display"
>               Depth           16
>               Modes           "1024x768"
>       EndSubSection
> 
> 
> EndSection
> 
> Section "ServerLayout"
> #Option "AIGLX" "false"
>       Identifier      "CRT and TV-Out"
>       Screen          0       "Screen0"
> #     Screen          1       "Screen1" RightOf "Screen0"
> #     Screen                  "Screen2" RightOf "Screen0"
>       Option "DontZap"  "off"
> EndSection
> 
> Section "DRI"
>       Mode    0666
> EndSection
> 
> Section "ServerFlags"
>       Option "DontZap"        "false"
>       Option "DontZoom"       "false"
>       Option "BlankTime"      "180"
> EndSection
> 
> 
> и всё равно почему-то драйвер synaptics в xorg пытается сделать странное и
>  отваливается:
> 
> (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
>  (/dev/input/event10) (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>  "evdev touchpad catchall" (**) SynPS/2 Synaptics TouchPad: Applying
>  InputClass "touchpad catchall" (II) Synaptics touchpad driver version
>  1.2.2
> (**) Option "Device" "/dev/input/event10"
> (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
> (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
> (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
> (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
> (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
> (--) SynPS/2 Synaptics TouchPad: touchpad found
> (**) SynPS/2 Synaptics TouchPad: always reports core events
> (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad"
>  (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping
>  acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel)
>  acceleration profile 0
> (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
> (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
> (--) SynPS/2 Synaptics TouchPad: touchpad found
> (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
>  (/dev/input/mouse1) (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>  "touchpad catchall" (II) Synaptics touchpad driver version 1.2.2
> SynPS/2 Synaptics TouchPad no synaptics event device found
> (**) Option "Device" "/dev/input/mouse1"
> Query no Synaptics: 6003C8
> (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
> (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics
>  hardware. (EE) PreInit failed for input device "SynPS/2 Synaptics
>  TouchPad"
> (II) UnloadModule: "synaptics"
> 


--
To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/201005061626.16140.breton.li...@gmail.com

Ответить