Konstantin Fadeyev пишет:
16 июня 2010 г. 23:35 пользователь Иван Лох <[email protected]> написал:On Wed, Jun 16, 2010 at 11:21:02PM +0600, Konstantin Fadeyev wrote:Прилично не прилично, но суровая правда жизни подсказывает, что и бубунта и кноппикс растут из тех же репозиториев, версии пакетов сопоставимы. Как я уже писал выше, про несвободные микропрограммы я не забыл.glxinfo egrep -B2 'WW|EE' < /var/log/Xorg.0.log-- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]Что-то у меня вообще сложно. Из-за неустановленного xserver-xorg-video-ati, подхватывался драйвер vesa. Отсутствие аппаратного 3d в общем понятно. При установке этого пакета при запуске иксов, в консоль начинают сыпаться ошибки связаные с drm. При этом иксы запущены но картинки нет, чёрный экран и всё. Сейчас попробую воспроизвести.
Чем бы там дело не закончилось, отсылаю Вам в помощь свои xorg.conf-ы.У меня был установлен файл "xorg.conf", ён содран с knoppix-a. До него стоял "xorg.conf.bak" -- всё вроде тоже фунциклировало. В обоих случаях, к сожалению, всё было медленнее и глючнее, чем на fglrx-e. Не знаю, как там сейчас дела обстоят, ибо в lenny сполз..
# /etc/X11/xorg.conf
# Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite
your /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
# Since evdev, manual keyboard/mice entries are mostly ignored:
# Keyboard auto-probed
# Touchpad auto-probed
# USB mouse auto-probed
# Serial Mouse auto-probed
### AIGLX for compiz 3D-Support with DRI & Composite
### This option doesn't hurt even if it's not supported by the individual card
Option "AIGLX" "true"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "DPMS" "true"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc:unscaled"
FontPath "/usr/share/fonts/X11/75dpi:unscaled"
FontPath "/usr/share/fonts/X11/100dpi:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/Speedo"
FontPath "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/share/fonts/X11/latin2/75dpi"
# FontPath "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/latex-ttf-fonts"
EndSection
Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
Load "dbe" # Double Buffering Extension, very important.
Load "dri" # This shouldn't be available choice if user has selected
driver vga, vesa or nv.
Load "glx" # GLX Extension.
Load "freetype" # Freetype fonts.
Load "type1" # Type 1 fonts
Load "record" # Developer extension, usually not needed
Load "extmod" # This is okay, but if you look into "man xorg.conf"
you'll find option NOT to include DGA extension with extmod, and for a good
reason.. DGA causes instability as it accesses videoram without consulting X
about it.
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
Load "ddc" # ddc probing of monitor, this should be never present, as
it gets automatically loaded.
# Load "GLcore" # This should be never present, as it gets automatically
loaded.
# Load "bitmap" # Should be never present, as it gets automatically
loaded. This is a font module, and loading it in xorg.conf makes X try to load
it twice.
EndSection
Section "Extensions"
# compiz needs Composite, but it can cause bad (end even
softreset-resistant)
# effects in some graphics cards, especially nv.
Option "Composite" "Enable"
EndSection
# Monitor section auto-generated by KNOPPIX mkxorgconfig
Section "Monitor"
Identifier "Monitor0"
ModelName "Generic Monitor"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT
default.
Option "MonitorLayout" "LVDS,AUTO"
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# Driver "radeonhd"
# Driver (chipset) autodetect
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
# compiz, beryl 3D-Support with DRI & Composite
Option "XAANoOffscreenPixmaps"
Option "AllowGLXWithComposite" "true"
Option "EnablePageFlip" "true"
Option "TripleBuffer" "true"
# Tweaks for the xorg 7.4 (otherwise broken) "intel" driver
Option "Tiling" "no"
Option "Legacy3D" "false"
# These two lines are (presumably) needed to prevent fonts from being scrambled
Option "XaaNoScanlineImageWriteRect" "true"
Option "XaaNoScanlineCPUToScreenColorExpandFill" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
SubSection "Display"
Depth 32
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf.bak
Description: application/trash
# /etc/X11/xorg.conf
# Created by KNOPPIX # Delete this line if you don't want KNOPPIX to overwrite
your /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
# Since evdev, manual keyboard/mice entries are mostly ignored:
# Keyboard auto-probed
# Touchpad auto-probed
# USB mouse auto-probed
# Serial Mouse auto-probed
### AIGLX for compiz 3D-Support with DRI & Composite
### This option doesn't hurt even if it's not supported by the individual card
Option "AIGLX" "true"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "DPMS" "true"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc:unscaled"
FontPath "/usr/share/fonts/X11/75dpi:unscaled"
FontPath "/usr/share/fonts/X11/100dpi:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/Speedo"
FontPath "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/share/fonts/X11/latin2/75dpi"
# FontPath "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/latex-ttf-fonts"
EndSection
Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
Load "dbe" # Double Buffering Extension, very important.
Load "dri" # This shouldn't be available choice if user has selected
driver vga, vesa or nv.
Load "glx" # GLX Extension.
Load "freetype" # Freetype fonts.
Load "type1" # Type 1 fonts
Load "record" # Developer extension, usually not needed
Load "extmod" # This is okay, but if you look into "man xorg.conf"
you'll find option NOT to include DGA extension with extmod, and for a good
reason.. DGA causes instability as it accesses videoram without consulting X
about it.
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
# Load "ddc" # ddc probing of monitor, this should be never present, as
it gets automatically loaded.
# Load "GLcore" # This should be never present, as it gets automatically
loaded.
# Load "bitmap" # Should be never present, as it gets automatically
loaded. This is a font module, and loading it in xorg.conf makes X try to load
it twice.
EndSection
Section "Extensions"
# compiz needs Composite, but it can cause bad (end even
softreset-resistant)
# effects in some graphics cards, especially nv.
Option "Composite" "Enable"
EndSection
# Monitor section auto-generated by KNOPPIX mkxorgconfig
Section "Monitor"
Identifier "Monitor0"
ModelName "Generic Monitor"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker. TFT
default.
Option "MonitorLayout" "LVDS,AUTO"
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# Driver (chipset) autodetect
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
# compiz, beryl 3D-Support with DRI & Composite
Option "XAANoOffscreenPixmaps"
Option "AllowGLXWithComposite" "true"
Option "EnablePageFlip" "true"
Option "TripleBuffer" "true"
# Tweaks for the xorg 7.4 (otherwise broken) "intel" driver
Option "Tiling" "no"
Option "Legacy3D" "false"
# These two lines are (presumably) needed to prevent fonts from being scrambled
Option "XaaNoScanlineImageWriteRect" "true"
Option "XaaNoScanlineCPUToScreenColorExpandFill" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
SubSection "Display"
Depth 32
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
