на сайте производителей сетевух довольно часто валяются дрова под люликс, мож они помогут..
On Fri, 28 Sep 2001 12:48:51 +0200 "Oleg A Chernov" <[EMAIL PROTECTED]> wrote: OAC> Здравствуйте, имеем OAC> Linux version 2.2.17 ([EMAIL PROTECTED]) (gcc version 2.95.2 20000220 OAC> (Debian OAC> GNU/Linux)) #2 Thu Sep 13 18:49:06 EEST 2001 OAC> Detected 551261 kHz processor. OAC> Console: colour VGA+ 80x25 OAC> Calibrating delay loop... 1097.73 BogoMIPS OAC> Memory: 63312k/65472k available (836k kernel code, 416k reserved, OAC> 868k data, OAC> 40k init) OAC> Dentry hash table entries: 8192 (order 4, 64k) OAC> Buffer cache hash table entries: 65536 (order 6, 256k) OAC> Page cache hash table entries: 16384 (order 4, 64k) OAC> CPU serial number disabled. OAC> CPU: Intel Pentium III (Coppermine) stepping 03 OAC> Checking 386/387 coupling... OK, FPU using exception 16 error OAC> reporting. OAC> Checking 'hlt' instruction... OK. OAC> POSIX conformance testing by UNIFIX OAC> PCI: PCI BIOS revision 2.10 entry at 0xfb400 OAC> PCI: Using configuration type 1 OAC> PCI: Probing PCI hardware OAC> PCI: 00:38 [1106/0596]: Work around ISA DMA hangs (00) OAC> Activating ISA DMA hang workarounds. OAC> Linux NET4.0 for Linux 2.2 OAC> Based upon Swansea University Computer Society NET3.039 OAC> NET4: Unix domain sockets 1.0 for Linux NET4.0. OAC> NET4: Linux TCP/IP 1.0 for NET4.0 OAC> IP Protocols: ICMP, UDP, TCP OAC> TCP: Hash tables configured (ehash 65536 bhash 65536) OAC> IPv4 over IPv4 tunneling driver OAC> early initialization of device tunl0 is deferred OAC> GRE over IPv4 tunneling driver OAC> early initialization of device gre0 is deferred OAC> Initializing RT netlink socket OAC> Starting kswapd v 1.5 OAC> Detected PS/2 Mouse Port. OAC> Serial driver version 4.27 with no serial options enabled OAC> ttyS00 at 0x03f8 (irq = 4) is a 16550A OAC> ttyS01 at 0x02f8 (irq = 3) is a 16550A OAC> pty: 256 Unix98 ptys configured OAC> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) OAC> loop: registered device at major 7 OAC> VP_IDE: IDE controller on PCI bus 00 dev 39 OAC> VP_IDE: not 100% native mode: will probe irqs later OAC> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA OAC> ide0: VIA Bus-Master (U)DMA Timing Config Success OAC> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio OAC> ide1: VIA Bus-Master (U)DMA Timing Config Success OAC> hda: Maxtor 91021U2, ATA DISK drive OAC> hdb: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive OAC> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 OAC> hda: Maxtor 91021U2, 9770MB w/512kB Cache, CHS=1245/255/63 OAC> hdb: ATAPI 40X CD-ROM drive, 128kB Cache OAC> Uniform CD-ROM driver Revision: 3.11 OAC> Floppy drive(s): fd0 is 1.44M OAC> FDC 0 is a post-1991 82077 OAC> eepro100.c:v1.09j-t 9/29/99 Donald Becker OAC> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html OAC> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. OAC> Savochkin <[EMAIL PROTECTED]> and others OAC> eth0: Intel PCI EtherExpress Pro100 82557, 00:02:B3:2E:EA:31, IRQ 5. OAC> Receiver lock-up bug exists -- enabling work-around. OAC> Board assembly 751767-003, Physical connectors present: RJ45 OAC> Primary interface chip i82555 PHY #1. OAC> Secondary interface chip i82555. OAC> General self-test: passed. OAC> Serial sub-system self-test: passed. OAC> Internal registers self-test: passed. OAC> ROM checksum self-test: passed (0x3258698e). OAC> eth1: Intel PCI EtherExpress Pro100 82557, 00:02:B3:2E:DC:45, IRQ 7. OAC> Receiver lock-up bug exists -- enabling work-around. OAC> Board assembly 751767-003, Physical connectors present: RJ45 OAC> Primary interface chip i82555 PHY #1. OAC> Secondary interface chip i82555. OAC> General self-test: passed. OAC> Serial sub-system self-test: passed. OAC> Internal registers self-test: passed. OAC> ROM checksum self-test: passed (0x3258698e). OAC> eepro100.c:v1.09j-t 9/29/99 Donald Becker OAC> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html OAC> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. OAC> Savochkin <[EMAIL PROTECTED]> and others OAC> Partition check: OAC> hda: hda1 hda2 < hda5 > hda3 OAC> VFS: Mounted root (ext2 filesystem) readonly. OAC> Freeing unused kernel memory: 40k freed OAC> Adding Swap: 232932k swap-space (priority -1) OAC> eth0: card reports no RX buffers. OAC> eth0: card reports no resources. OAC> eth0: card reports no RX buffers. OAC> eth0: card reports no resources. OAC> eth0: card reports no RX buffers. OAC> eth0: card reports no resources. OAC> eth0: card reports no RX buffers. OAC> eth0: card reports no resources. OAC> eth0: card reports no RX buffers. OAC> eth0: card reports no resources. OAC> И так до бесконечности , иногда помагает ifup eth0 ; ifdown eth0 OAC> Вопрос - Как отучить? OAC> -- OAC> To UNSUBSCRIBE, email to [EMAIL PROTECTED] OAC> with a subject of "unsubscribe". Trouble? Contact OAC> [EMAIL PROTECTED] --
