Добрый день всем! Такая вот проблема:
Обновил ядро до 4.7 из бекпорта, перезагрузился, пропал WiFi.
$ systemctl status networking.service
● networking.service - Raise network interfaces
Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor
preset: enabled)
Drop-In: /run/systemd/generator/networking.service.d
└─50-insserv.conf-$network.conf
Active: failed (Result: exit-code) since Ср 2016-10-26 14:15:03 MSK; 15min
ago
Docs: man:interfaces(5)
Main PID: 2242 (code=exited, status=1/FAILURE)
окт 26 14:15:03 debian wpa_supplicant[2320]: Successfully initialized
wpa_supplicant
окт 26 14:15:03 debian wpa_supplicant[2320]: Could not read interface wlan0
flags: No such device
окт 26 14:15:03 debian wpa_supplicant[2320]: nl80211: Driver does not support
authentication/association or connect commands
окт 26 14:15:03 debian wpa_supplicant[2320]: Could not read interface wlan0
flags: No such device
окт 26 14:15:03 debian wpa_supplicant[2320]: Could not read interface wlan0
flags: No such device
окт 26 14:15:03 debian wpa_supplicant[2320]: WEXT: Could not set interface
'wlan0' UP
окт 26 14:15:03 debian wpa_supplicant[2320]: wlan0: Failed to initialize driver
interface
окт 26 14:15:03 debian ifup[2242]: /etc/network/if-pre-up.d/wpasupplicant: 120:
/etc/network/if-pre-up.d/wpasupplicant: cannot create /dev/stderr: No
окт 26 14:15:03 debian ifup[2242]: run-parts:
/etc/network/if-pre-up.d/wpasupplicant exited with return code 1
окт 26 14:15:03 debian ifup[2242]: Failed to bring up wlan0.
lines 1-18/18 (END)
Карта для WiFi:
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless
Network Adapter (rev 01)
Загрузил новый драйвер:
broadcom-sta-common_6.30.223.271-2~bpo8+1_all.deb
broadcom-sta-dkms_6.30.223.271-2~bpo8+1_all.deb
Запустил реконфигурацию (исходники драйвера подгрузились в процессе
реконфигурации):
$ sudo dpkg-reconfigure broadcom-sta-dkms
[sudo] password for User:
------------------------------
Deleting module version: 6.30.223.248-3
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-6.30.223.271 DKMS files...
Building for 4.7.0-0.bpo.1-amd64
Building initial module for 4.7.0-0.bpo.1-amd64
Error! Bad return status for module build on kernel: 4.7.0-0.bpo.1-amd64
(x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.271/build/make.log for more
information.
Согласно последней строки сообщения смотрю лог (как говорят смотрю в книгу,
вижу ??? )
Лог-файл прилагается.
Может я что-то сделал не так?
--
С уважением,
Владимир Ветров.
make.log.7z
Description: application/7z-compressed
