Стоит:
ii firmware-realtek 20161130-2
all Binary firmware for Realtek wired/wifi/BT adapters
3 марта 2017 г., 13:44 пользователь <[email protected]> написал:
> On Fri, 3 Mar 2017, Grigory Fateyev wrote:
>
> Всем привет!
>>
>> Имею ноутбук Asus ROG GL552VW
>>
>> Установлен Debian Stretch, ядро 4.9.0-1-amd64
>>
>> Если втыкать напрямую, то получаю в dmesg[1], если через
>> переходник, то всё норм (значит карточка нормальная). Можно
>> ли что с этим поделать?
>>
>> Сам картридер:
>> lspci -vnn | grep -A5 RTL8411B
>> 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B
>> PCI Express Card Reader [10ec:5287] (rev 01)
>> Subsystem: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card
>> Reader
>> [10ec:5287]
>> Flags: bus master, fast devsel, latency 0, IRQ 125
>> Memory at df115000 (32-bit, non-prefetchable) [size=4K]
>> Expansion ROM at df100000 [disabled] [size=64K]
>> Capabilities: [40] Power Management version 3
>> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>
>>
>> [1] dmesg:
>> [219613.445163] Buffer I/O error on dev mmcblk0, logical block 2, async
>> page read
>> [219613.445326] mmcblk0: error -123 sending status command, retrying
>> [219613.445337] mmcblk0: error -123 sending status command, retrying
>> [219613.445345] mmcblk0: error -123 sending status command, aborting
>> [219613.445354] Buffer I/O error on dev mmcblk0, logical block 2, async
>> page read
>> [219613.448616] mmcblk0: error -123 sending status command, retrying
>> [219613.448627] mmcblk0: error -123 sending status command, retrying
>> [219613.448635] mmcblk0: error -123 sending status command, aborting
>> [219613.448677] mmcblk0: error -123 sending status command, retrying
>> [219613.448684] mmcblk0: error -123 sending status command, retrying
>> [219613.448690] mmcblk0: error -123 sending status command, aborting
>> [219613.448697] Buffer I/O error on dev mmcblk0p1, logical block 952304,
>> async page read
>> [219613.509852] mmc0: card 1234 removed
>> [219615.421695] mmc0: new high speed SDHC card at address 1234
>> [219615.422496] mmcblk0: mmc0:1234 SA04G 3.64 GiB
>> [219615.424488] mmcblk0: p1
>> [219617.061944] mmc0: card 1234 removed
>> [219618.241877] mmc0: new high speed SDHC card at address 1234
>> [219618.242397] mmcblk0: mmc0:1234 SA04G 3.64 GiB
>> [219618.243848] mmcblk0: p1
>>
>> Спасибо!
>>
>>
> Не понятно, а firmware-realtek установлен?
>
> На Debian/testing - firmware-realtek 20161130-2:
> * Realtek RTL8411-1 firmware, version 0.0.3 (rtl_nic/rtl8411-1.fw)
> * Realtek RTL8411-2 firmware, version 0.0.1 (rtl_nic/rtl8411-2.fw)
>
> Ядро вроде бы должно поддерживать:
> http://cateee.net/lkddb/web-lkddb/MFD_RTSX_PCI.html
>
> Ю.
