Угодай n/a wrote:
11.09.07, Andrey I. Kislyak<[EMAIL PROTECTED]> написал(а):
Лучше использовать ftp-proxy в обратном направлении у него есть такой режим
Это как это в обратном направлении?
Вот ман хотя и OpenBSD'шный думаю для линя тоже такой прокси должен быть
*-R* /address/
Fixed server address, also known as reverse mode. The proxy will
always connect to the same server, regardless of where the client
wanted to connect to (before it was redirected). Use this option
to proxy for a server behind NAT, or to forward all connections
to another proxy.
FTP-PROXY(8) OpenBSD System Manager's Manual FTP-PROXY(8)
*NAME*
<http://www.openbsd.org/cgi-bin/man.cgi?query=ftp-proxy&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html#end>
*ftp-proxy* - Internet File Transfer Protocol proxy daemon
*SYNOPSIS*
<http://www.openbsd.org/cgi-bin/man.cgi?query=ftp-proxy&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html#end>
*ftp-proxy* [*-6Adrv*] [*-a* /address/] [*-b* /address/] [*-D* /level/]
[*-m* /maxsessions/]
[*-P* /port/] [*-p* /port/] [*-q* /queue/] [*-R* /address/] [*-T*
/tag/]
[*-t* /timeout/]
*DESCRIPTION*
<http://www.openbsd.org/cgi-bin/man.cgi?query=ftp-proxy&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html#end>
*ftp-proxy* is a proxy for the Internet File Transfer Protocol. FTP con-
trol connections should be redirected into the proxy using the pf(4)
<http://www.openbsd.org/cgi-bin/man.cgi?query=pf&sektion=4&arch=i386&apropos=0&manpath=OpenBSD+Current>
/rdr/
command, after which the proxy connects to the server on behalf of the
client.
The proxy allows data connections to pass, rewriting and redirecting them
so that the right addresses are used. All connections from the client to
the server have their source address rewritten so they appear to come
from the proxy. Consequently, all connections from the server to the
proxy have their destination address rewritten, so they are redirected to
the client. The proxy uses the pf(4)
<http://www.openbsd.org/cgi-bin/man.cgi?query=pf&sektion=4&arch=i386&apropos=0&manpath=OpenBSD+Current>
/anchor/ facility for this.
Assuming the FTP control connection is from $client to $server, the proxy
connected to the server using the $proxy source address, and $port is ne-
gotiated, then *ftp-proxy* adds the following rules to the various anchors.
(These example rules use inet, but the proxy also supports inet6.)
In case of active mode (PORT or EPRT):
rdr from $server to $proxy port $port -> $client
pass quick inet proto tcp \
from $server to $client port $port
In case of passive mode (PASV or EPSV):
nat from $client to $server port $port -> $proxy
pass in quick inet proto tcp \
from $client to $server port $port
pass out quick inet proto tcp \
from $proxy to $server port $port
The options are as follows:
*-6* IPv6 mode. The proxy will expect and use IPv6 addresses for all
communication. Only the extended FTP modes EPSV and EPRT are al-
lowed with IPv6. The proxy is in IPv4 mode by default.
*-A* Only permit anonymous FTP connections. Either user "ftp" or user
"anonymous" is allowed.
*-a* /address/
The proxy will use this as the source address for the control
connection to a server.
*-b* /address/
Address where the proxy will listen for redirected control con-
nections. The default is 127.0.0.1, or ::1 in IPv6 mode.
*-D* /level/
Debug level, ranging from 0 to 7. Higher is more verbose. The
default is 5. (These levels correspond to the syslog(3)
<http://www.openbsd.org/cgi-bin/man.cgi?query=syslog&sektion=3&arch=i386&apropos=0&manpath=OpenBSD+Current>
levels.)
*-d* Do not daemonize. The process will stay in the foreground, log-
ging to standard error.
*-m* /maxsessions/
Maximum number of concurrent FTP sessions. When the proxy reach-
es this limit, new connections are denied. The default is 100
sessions. The limit can be lowered to a minimum of 1, or raised
to a maximum of 500.
*-P* /port/
Fixed server port. Only used in combination with *-R*. The de-
fault is port 21.
*-p* /port/
Port where the proxy will listen for redirected connections. The
default is port 8021.
*-q* /queue/
Create rules with queue /queue/ appended, so that data connections
can be queued.
*-R* /address/
Fixed server address, also known as reverse mode. The proxy will
always connect to the same server, regardless of where the client
wanted to connect to (before it was redirected). Use this option
to proxy for a server behind NAT, or to forward all connections
to another proxy.
*-r* Rewrite sourceport to 20 in active mode to suit ancient clients
that insist on this RFC property.
*-T* /tag/ Automatically tag packets passing through the pf(4)
<http://www.openbsd.org/cgi-bin/man.cgi?query=pf&sektion=4&arch=i386&apropos=0&manpath=OpenBSD+Current>
rule with the
name supplied.
*-t* /timeout/
Number of seconds that the control connection can be idle, before
the proxy will disconnect. The maximum is 86400 seconds, which
is also the default. Do not set this too low, because the con-
trol connection is usually idle when large data transfers are
taking place.
*-v* Set the 'log' flag on pf rules committed by *ftp-proxy*. Use
twice
to set the 'log-all' flag. The pf rules do not log by default.
*CONFIGURATION*
<http://www.openbsd.org/cgi-bin/man.cgi?query=ftp-proxy&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html#end>
To make use of the proxy, pf.conf(5)
<http://www.openbsd.org/cgi-bin/man.cgi?query=pf.conf&sektion=5&arch=i386&apropos=0&manpath=OpenBSD+Current>
needs the following rules. All an-
chors are mandatory. Adjust the rules as needed.
In the NAT section:
nat-anchor "ftp-proxy/*"
rdr-anchor "ftp-proxy/*"
rdr pass on $int_if proto tcp from $lan to any port 21 -> \
127.0.0.1 port 8021
In the rule section:
anchor "ftp-proxy/*"
pass out proto tcp from $proxy to any port 21
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
