В Срд, 05/12/2007 в 18:40 +0200, Maxim Kudelya пишет: > Покотиленко Костик wrote: > > sda - загрузочный > > sdb-sde - mdadm RAID 10 > > > > Что это значит? Битые секторы или что? > Прогоните тесты для начала: > Для SATA винтов: > smartctl -d ata -t short /dev/sdb > smartctl -d ata -t long /dev/sdb > > И покажите потом: > smartctl -d ata -a /dev/sdb
Из 4-х дисков, 2 не прошли тест, на 2-х тест прерывается, проверю позже без нагрузки. Кстати, для RAID 10 от mdadm нужно SMART на отдельные винты включать или на массив, как в случае с 3ware? По этому можно что-то сказать? # smartctl -a -d ata /dev/sdb smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD3200YS-01PGB0 Serial Number: WD-WCAPD4751993 Firmware Version: 21.00M21 User Capacity: 320.072.933.376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Dec 6 13:42:03 2007 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (9600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 191 190 021 Pre-fail Always - 5433 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 37 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2224 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 190 Unknown_Attribute 0x0022 075 046 000 Old_age Always - 25 194 Temperature_Celsius 0x0022 125 096 000 Old_age Always - 25 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 2 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 48 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 48 occurred at disk power-on lifetime: 2116 hours (88 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 80 0c cc e0 Error: AMNF at LBA = 0x00cc0c80 = 13372544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 80 0c cc 17 00 9d+21:59:57.286 READ DMA EXT ec 03 45 00 00 00 00 00 9d+21:59:57.285 IDENTIFY DEVICE ef 03 45 00 00 00 00 00 9d+21:59:57.285 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 00 00 9d+21:59:57.283 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:55.187 READ DMA EXT Error 47 occurred at disk power-on lifetime: 2116 hours (88 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 80 0c cc e0 Error: AMNF at LBA = 0x00cc0c80 = 13372544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 80 0c cc 17 00 9d+21:59:55.187 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:55.186 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:53.249 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:53.248 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:51.310 READ DMA EXT Error 46 occurred at disk power-on lifetime: 2116 hours (88 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 80 0c cc e0 Error: AMNF at LBA = 0x00cc0c80 = 13372544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 80 0c cc 17 00 9d+21:59:53.249 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:53.248 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:51.310 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:51.309 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:49.372 READ DMA EXT Error 45 occurred at disk power-on lifetime: 2116 hours (88 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 80 0c cc e0 Error: AMNF at LBA = 0x00cc0c80 = 13372544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 80 0c cc 17 00 9d+21:59:51.310 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:51.309 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:49.372 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:49.371 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:47.439 READ DMA EXT Error 44 occurred at disk power-on lifetime: 2116 hours (88 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 80 0c cc e0 Error: AMNF at LBA = 0x00cc0c80 = 13372544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 80 0c cc 17 00 9d+21:59:49.372 READ DMA EXT ec 00 00 81 0f cc 00 00 9d+21:59:49.371 IDENTIFY DEVICE 25 00 00 80 0c cc 17 00 9d+21:59:47.439 READ DMA EXT 25 00 80 00 0c cc 17 00 9d+21:59:47.424 READ DMA EXT ec 00 00 f1 0b cc 00 00 9d+21:59:47.423 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 2223 399248369 # 2 Short offline Completed: read failure 90% 2223 399248369 # 3 Short offline Completed: read failure 90% 2223 399248369 # 4 Short offline Completed: read failure 90% 2223 399248369 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # -- Покотиленко Костик <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
