Доброго всем LOCAL_TIME! Ни в какую не получается настроить нормальную работу указанной связки.
Имеется машинка с интегрированным видео на Intel915G. Был обычный монитор, поменяли на Wide (Benq g900wa) с разрешением 1440x900. Установили пакет 915resolution, в конфиге /etc/default/915resolution # # 915resolution default # # find free modes by /usr/sbin/915resolution -l # and set it to MODE or set to 'MODE=auto' # # With 'auto' detection, the panel-size will be fetched from the VBE # BIOS if possible and the highest-numbered mode in each bit-depth # will be overwritten with the detected panel-size. MODE=5c # # and set resolutions for the mode. # e.g. use XRESO=1024 and YRESO=768 XRESO=1440 YRESO=900 # # We can also set the pixel mode. # e.g. use BIT=32 # Please note that this is optional, # you can also leave this value blank. BIT=32 В /etc/X11/xorg.conf [SKIP] Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection [SKIP] Section "Device" Identifier "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller" Driver "i810" BusID "PCI:0:2:0" EndSection [SKIP] Section "Monitor" Identifier "G900Wa" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller" Monitor "G900Wa" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1440x900" EndSubSection EndSection [SKIP] Иксы стартуют, но монитор упорно выдает "Frequency Out of range". Перепробовал все. что пришло в голову. Прописывал диапазоны допустимых частот из паспорта, генерил Modeline-ы и вставлял их в конфиг. На выходе либо "Frequency Out of range", либо совершенно не то разрешение, которое "родное" для монитора. И что вообще ставит в тупик - KDE показывает одно, а меню самого монитора - другое. Например KDE в центре управления отображает текущее разрешение 1600х1200, а Info в меню монитора говорит, что [EMAIL PROTECTED] Помогите советом - голову скоро вывихну. -- -- С наилучшими пожеланиями, Олег Анисимов AKA Yoda -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]