Так блин... лежать-бояться... Водим глючное поделие имени дебиана очень криво жгёт. Надо пользоваться мейнстримом, то есть сидирекорд от шилли.
http://cdrecord.berlios.de/private/cdrecord.html 26 января 2009 г. 18:29 пользователь Mishustin Alexey <shum...@shumkar.ru> написал: > В Пнд, 26/01/2009 в 17:34 +0300, Dmitry E. Oboukhov пишет: >> MA> И что ж за глюк-то с записью, а? Некошерно как-то образ дебиана под >> MA> виндой жечь... >> а попробуй писать woodim'ом а не dd > > Это была моя _последняя_ )) болванка: > > $ wodim -dev=/dev/dvd -speed=0 -dao ./debian-testing-i386-DVD-1.iso > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identification : 'DVD_RW ND-3500AG' > Revision : '2.16' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). > Driver flags : SWABAUDIO BURNFREE > Supported modes: PACKET SAO > Speed set to 8467 KB/s > Starting to write CD/DVD at speed 6.0 in real SAO mode for single > session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after > 0.000 (200) s > CDB: 2A 00 00 0A 0F 8B 00 00 1F 00 > Sense Bytes: > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 63488 > cmd finished after 0.000s timeout 200s > write track data: error after 1350326272 bytes > wodim: A write error occured. > wodim: Please properly read the error message above. > Errno: 0 (Success), test unit ready scsi sendcmd: no error > CDB: 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming > ready) Fru 0x0 > Sense flags: Blk 0 (not valid) operation 0% done > cmd finished after 0.000s timeout 200s > Errno: 0 (Success), close track/session scsi sendcmd: no error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming > ready) Fru 0x0 > Sense flags: Blk 0 (not valid) operation 0% done > cmd finished after 0.000s timeout 1000s > Errno: 0 (Success), flush cache scsi sendcmd: no error > CDB: 35 00 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming > ready) Fru 0x0 > Sense flags: Blk 0 (not valid) operation 0% done > cmd finished after 0.000s timeout 1000s > Trouble flushing the cache > > -- > С уважением, > Алексей Мишустин > > > -- > To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > > -- Boris Popov -- To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org