А номер для дозвона не попутал? Сдается мне он должен быть вроде таким: *99***1# -- Best regards, Dmitry Ulyanov
Fri, Jun 19, 2009 at 09:15:51PM +0700, Ivan Petrov написал(а): > wvdial нашел beeline gprs/3g modem на /dev/ttyUSB1 > > > я создал файл конфигурации: > [Dialer Defaults] > Init1 = ATZ > Modem Type = Analog Modem > Phone = *99# > ISDN = 0 > Username = beeline > Init2 = AT+CGDCONT=1,"IP","home.beeline.ru" > Password = beeline > Modem = /dev/ttyUSB1 > Baud = 921600 > > но после запуска: > > $ wvdial --config=/usr/bin/beeline > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: AT+CGDCONT=1,"IP","home.beeline.ru" > AT+CGDCONT=1,"IP","home.beeline.ru" > OK > --> Modem initialized. > --> Sending: ATDT*99# > --> Waiting for carrier. > ATDT*99# > --> Timed out while dialing. Trying again. > --> Sending: ATDT*99# > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > > в чём проблема? > > И.П. > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact [email protected] > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
