Your message dated Mon, 11 May 2026 09:08:03 +0000
with message-id <[email protected]>
and subject line Bug#1126230: fixed in numba 0.65.1+dfsg-1
has caused the Debian Bug report #1126230,
regarding python-dynasor: FTBFS: E ImportError: Numba could not be imported.
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1126230: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126230
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:python-dynasor
Version: 2.1-2
Severity: serious
Tags: ftbfs forky sid
Dear maintainer:
During a rebuild of all packages in unstable, this package failed to build.
Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:
https://people.debian.org/~sanvila/build-logs/202601/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:python-dynasor, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
debian/rules clean
dh clean --buildsystem=pybuild
dh_auto_clean -O--buildsystem=pybuild
dh_autoreconf_clean -O--buildsystem=pybuild
dh_clean -O--buildsystem=pybuild
debian/rules binary
dh binary --buildsystem=pybuild
dh_update_autotools_config -O--buildsystem=pybuild
dh_autoreconf -O--buildsystem=pybuild
dh_auto_configure -O--buildsystem=pybuild
dh_auto_build -O--buildsystem=pybuild
I: pybuild plugin_pyproject:139: Building wheel for python3.14 with "build"
module
I: pybuild base:384: python3.14 -m build --skip-dependency-check --no-isolation
--wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14
* Building wheel...
/usr/lib/python3/dist-packages/setuptools/dist.py:759:
SetuptoolsDeprecationWarning: License classifiers are deprecated.
!!
********************************************************************************
Please consider removing the following classifiers in favor of a SPDX
license expression:
License :: OSI Approved :: MIT License
See
https://packaging.python.org/en/latest/guides/writing-pyproject-toml/#license
for details.
********************************************************************************
!!
self._finalize_license_expression()
running bdist_wheel
running build
running build_py
creating build/lib/dynasor
copying dynasor/correlation_functions.py -> build/lib/dynasor
copying dynasor/logging_tools.py -> build/lib/dynasor
copying dynasor/units.py -> build/lib/dynasor
copying dynasor/__init__.py -> build/lib/dynasor
copying dynasor/sample.py -> build/lib/dynasor
creating build/lib/dynasor/cli
copying dynasor/cli/main.py -> build/lib/dynasor/cli
copying dynasor/cli/__init__.py -> build/lib/dynasor/cli
creating build/lib/dynasor/core
copying dynasor/core/time_averager.py -> build/lib/dynasor/core
copying dynasor/core/rho_j_q_numba.py -> build/lib/dynasor/core
copying dynasor/core/reciprocal.py -> build/lib/dynasor/core
copying dynasor/core/__init__.py -> build/lib/dynasor/core
creating build/lib/dynasor/trajectory
copying dynasor/trajectory/trajectory_frame.py -> build/lib/dynasor/trajectory
copying dynasor/trajectory/ase_trajectory_reader.py ->
build/lib/dynasor/trajectory
copying dynasor/trajectory/lammps_trajectory_reader.py ->
build/lib/dynasor/trajectory
copying dynasor/trajectory/atomic_indices.py -> build/lib/dynasor/trajectory
copying dynasor/trajectory/mdanalysis_trajectory_reader.py ->
build/lib/dynasor/trajectory
copying dynasor/trajectory/abstract_trajectory_reader.py ->
build/lib/dynasor/trajectory
copying dynasor/trajectory/trajectory.py -> build/lib/dynasor/trajectory
copying dynasor/trajectory/extxyz_trajectory_reader.py ->
build/lib/dynasor/trajectory
copying dynasor/trajectory/__init__.py -> build/lib/dynasor/trajectory
creating build/lib/dynasor/qpoints
copying dynasor/qpoints/spherical_qpoints.py -> build/lib/dynasor/qpoints
copying dynasor/qpoints/tools.py -> build/lib/dynasor/qpoints
copying dynasor/qpoints/__init__.py -> build/lib/dynasor/qpoints
copying dynasor/qpoints/lattice.py -> build/lib/dynasor/qpoints
creating build/lib/dynasor/tools
copying dynasor/tools/structures.py -> build/lib/dynasor/tools
copying dynasor/tools/damped_harmonic_oscillator.py -> build/lib/dynasor/tools
copying dynasor/tools/acfs.py -> build/lib/dynasor/tools
copying dynasor/tools/__init__.py -> build/lib/dynasor/tools
creating build/lib/dynasor/post_processing
copying dynasor/post_processing/neutron_scattering_lengths.py ->
build/lib/dynasor/post_processing
copying dynasor/post_processing/average_runs.py ->
build/lib/dynasor/post_processing
copying dynasor/post_processing/weights.py -> build/lib/dynasor/post_processing
copying dynasor/post_processing/spherical_average.py ->
build/lib/dynasor/post_processing
copying dynasor/post_processing/x_ray_form_factors.py ->
build/lib/dynasor/post_processing
copying dynasor/post_processing/atomic_weighting.py ->
build/lib/dynasor/post_processing
copying dynasor/post_processing/filon.py -> build/lib/dynasor/post_processing
copying dynasor/post_processing/__init__.py -> build/lib/dynasor/post_processing
copying dynasor/post_processing/neutron_scattering_lengths.json ->
build/lib/dynasor/post_processing
creating build/lib/dynasor/post_processing/form-factors
copying dynasor/post_processing/form-factors/waasmaier.txt ->
build/lib/dynasor/post_processing/form-factors
copying
dynasor/post_processing/form-factors/x-ray-parameters-waasmaier-kirfel-1995.json
-> build/lib/dynasor/post_processing/form-factors
copying
dynasor/post_processing/form-factors/electron-parameters-kmax2-peng-1996.json
-> build/lib/dynasor/post_processing/form-factors
copying
dynasor/post_processing/form-factors/electron-parameters-kmax6-peng-1996.json
-> build/lib/dynasor/post_processing/form-factors
copying
dynasor/post_processing/form-factors/compton-parameters-waasmaier-kirfel-1995.json
-> build/lib/dynasor/post_processing/form-factors
copying dynasor/post_processing/form-factors/x-ray-parameters-itcc-2004.json ->
build/lib/dynasor/post_processing/form-factors
running build_scripts
creating build/scripts-3.14
copying and adjusting bin/dynasor -> build/scripts-3.14
changing mode of build/scripts-3.14/dynasor from 644 to 755
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/dynasor
copying build/lib/dynasor/correlation_functions.py ->
build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/cli
copying build/lib/dynasor/cli/main.py ->
build/bdist.linux-x86_64/wheel/./dynasor/cli
copying build/lib/dynasor/cli/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/cli
copying build/lib/dynasor/logging_tools.py ->
build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/core
copying build/lib/dynasor/core/time_averager.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/rho_j_q_numba.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/reciprocal.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/units.py -> build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/trajectory
copying build/lib/dynasor/trajectory/trajectory_frame.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/ase_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/lammps_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/atomic_indices.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/mdanalysis_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/abstract_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/trajectory.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/extxyz_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
creating build/bdist.linux-x86_64/wheel/dynasor/qpoints
copying build/lib/dynasor/qpoints/spherical_qpoints.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/tools.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/lattice.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
creating build/bdist.linux-x86_64/wheel/dynasor/tools
copying build/lib/dynasor/tools/structures.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/damped_harmonic_oscillator.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/acfs.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
creating build/bdist.linux-x86_64/wheel/dynasor/post_processing
copying build/lib/dynasor/post_processing/neutron_scattering_lengths.json ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/neutron_scattering_lengths.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/average_runs.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/weights.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/spherical_average.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
creating build/bdist.linux-x86_64/wheel/dynasor/post_processing/form-factors
copying build/lib/dynasor/post_processing/form-factors/waasmaier.txt ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/x-ray-parameters-waasmaier-kirfel-1995.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/electron-parameters-kmax2-peng-1996.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/electron-parameters-kmax6-peng-1996.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/compton-parameters-waasmaier-kirfel-1995.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/x-ray-parameters-itcc-2004.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying build/lib/dynasor/post_processing/x_ray_form_factors.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/atomic_weighting.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/filon.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor
copying build/lib/dynasor/sample.py -> build/bdist.linux-x86_64/wheel/./dynasor
running install_egg_info
running egg_info
creating dynasor.egg-info
writing dynasor.egg-info/PKG-INFO
writing dependency_links to dynasor.egg-info/dependency_links.txt
writing requirements to dynasor.egg-info/requires.txt
writing top-level names to dynasor.egg-info/top_level.txt
writing manifest file 'dynasor.egg-info/SOURCES.txt'
reading manifest file 'dynasor.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'dynasor.egg-info/SOURCES.txt'
Copying dynasor.egg-info to
build/bdist.linux-x86_64/wheel/./dynasor-2.1.egg-info
running install_scripts
creating build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts
copying build/scripts-3.14/dynasor ->
build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts
changing mode of
build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts/dynasor to 755
creating build/bdist.linux-x86_64/wheel/dynasor-2.1.dist-info/WHEEL
creating
'/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14/.tmp-exy50pcm/dynasor-2.1-py3-none-any.whl'
and adding 'build/bdist.linux-x86_64/wheel' to it
adding 'dynasor/__init__.py'
adding 'dynasor/correlation_functions.py'
adding 'dynasor/logging_tools.py'
adding 'dynasor/sample.py'
adding 'dynasor/units.py'
adding 'dynasor/cli/__init__.py'
adding 'dynasor/cli/main.py'
adding 'dynasor/core/__init__.py'
adding 'dynasor/core/reciprocal.py'
adding 'dynasor/core/rho_j_q_numba.py'
adding 'dynasor/core/time_averager.py'
adding 'dynasor/post_processing/__init__.py'
adding 'dynasor/post_processing/atomic_weighting.py'
adding 'dynasor/post_processing/average_runs.py'
adding 'dynasor/post_processing/filon.py'
adding 'dynasor/post_processing/neutron_scattering_lengths.json'
adding 'dynasor/post_processing/neutron_scattering_lengths.py'
adding 'dynasor/post_processing/spherical_average.py'
adding 'dynasor/post_processing/weights.py'
adding 'dynasor/post_processing/x_ray_form_factors.py'
adding
'dynasor/post_processing/form-factors/compton-parameters-waasmaier-kirfel-1995.json'
adding
'dynasor/post_processing/form-factors/electron-parameters-kmax2-peng-1996.json'
adding
'dynasor/post_processing/form-factors/electron-parameters-kmax6-peng-1996.json'
adding 'dynasor/post_processing/form-factors/waasmaier.txt'
adding 'dynasor/post_processing/form-factors/x-ray-parameters-itcc-2004.json'
adding
'dynasor/post_processing/form-factors/x-ray-parameters-waasmaier-kirfel-1995.json'
adding 'dynasor/qpoints/__init__.py'
adding 'dynasor/qpoints/lattice.py'
adding 'dynasor/qpoints/spherical_qpoints.py'
adding 'dynasor/qpoints/tools.py'
adding 'dynasor/tools/__init__.py'
adding 'dynasor/tools/acfs.py'
adding 'dynasor/tools/damped_harmonic_oscillator.py'
adding 'dynasor/tools/structures.py'
adding 'dynasor/trajectory/__init__.py'
adding 'dynasor/trajectory/abstract_trajectory_reader.py'
adding 'dynasor/trajectory/ase_trajectory_reader.py'
adding 'dynasor/trajectory/atomic_indices.py'
adding 'dynasor/trajectory/extxyz_trajectory_reader.py'
adding 'dynasor/trajectory/lammps_trajectory_reader.py'
adding 'dynasor/trajectory/mdanalysis_trajectory_reader.py'
adding 'dynasor/trajectory/trajectory.py'
adding 'dynasor/trajectory/trajectory_frame.py'
adding 'dynasor-2.1.data/scripts/dynasor'
adding 'dynasor-2.1.dist-info/licenses/LICENSE'
adding 'dynasor-2.1.dist-info/METADATA'
adding 'dynasor-2.1.dist-info/WHEEL'
adding 'dynasor-2.1.dist-info/top_level.txt'
adding 'dynasor-2.1.dist-info/RECORD'
removing build/bdist.linux-x86_64/wheel
Successfully built dynasor-2.1-py3-none-any.whl
I: pybuild plugin_pyproject:165: Unpacking wheel built for python3.14 with
"installer" module
I: pybuild plugin_pyproject:139: Building wheel for python3.13 with "build"
module
I: pybuild base:384: python3.13 -m build --skip-dependency-check --no-isolation
--wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13
* Building wheel...
/usr/lib/python3/dist-packages/setuptools/dist.py:759:
SetuptoolsDeprecationWarning: License classifiers are deprecated.
!!
********************************************************************************
Please consider removing the following classifiers in favor of a SPDX
license expression:
License :: OSI Approved :: MIT License
See
https://packaging.python.org/en/latest/guides/writing-pyproject-toml/#license
for details.
********************************************************************************
!!
self._finalize_license_expression()
running bdist_wheel
running build
running build_py
running build_scripts
creating build/scripts-3.13
copying and adjusting bin/dynasor -> build/scripts-3.13
changing mode of build/scripts-3.13/dynasor from 644 to 755
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/dynasor
copying build/lib/dynasor/correlation_functions.py ->
build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/cli
copying build/lib/dynasor/cli/main.py ->
build/bdist.linux-x86_64/wheel/./dynasor/cli
copying build/lib/dynasor/cli/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/cli
copying build/lib/dynasor/logging_tools.py ->
build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/core
copying build/lib/dynasor/core/time_averager.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/rho_j_q_numba.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/reciprocal.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/core/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/core
copying build/lib/dynasor/units.py -> build/bdist.linux-x86_64/wheel/./dynasor
creating build/bdist.linux-x86_64/wheel/dynasor/trajectory
copying build/lib/dynasor/trajectory/trajectory_frame.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/ase_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/lammps_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/atomic_indices.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/mdanalysis_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/abstract_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/trajectory.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/extxyz_trajectory_reader.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
copying build/lib/dynasor/trajectory/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/trajectory
creating build/bdist.linux-x86_64/wheel/dynasor/qpoints
copying build/lib/dynasor/qpoints/spherical_qpoints.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/tools.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
copying build/lib/dynasor/qpoints/lattice.py ->
build/bdist.linux-x86_64/wheel/./dynasor/qpoints
creating build/bdist.linux-x86_64/wheel/dynasor/tools
copying build/lib/dynasor/tools/structures.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/damped_harmonic_oscillator.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/acfs.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
copying build/lib/dynasor/tools/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/tools
creating build/bdist.linux-x86_64/wheel/dynasor/post_processing
copying build/lib/dynasor/post_processing/neutron_scattering_lengths.json ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/neutron_scattering_lengths.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/average_runs.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/weights.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/spherical_average.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
creating build/bdist.linux-x86_64/wheel/dynasor/post_processing/form-factors
copying build/lib/dynasor/post_processing/form-factors/waasmaier.txt ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/x-ray-parameters-waasmaier-kirfel-1995.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/electron-parameters-kmax2-peng-1996.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/electron-parameters-kmax6-peng-1996.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/compton-parameters-waasmaier-kirfel-1995.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying
build/lib/dynasor/post_processing/form-factors/x-ray-parameters-itcc-2004.json
-> build/bdist.linux-x86_64/wheel/./dynasor/post_processing/form-factors
copying build/lib/dynasor/post_processing/x_ray_form_factors.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/atomic_weighting.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/filon.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/post_processing/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor/post_processing
copying build/lib/dynasor/__init__.py ->
build/bdist.linux-x86_64/wheel/./dynasor
copying build/lib/dynasor/sample.py -> build/bdist.linux-x86_64/wheel/./dynasor
running install_egg_info
running egg_info
writing dynasor.egg-info/PKG-INFO
writing dependency_links to dynasor.egg-info/dependency_links.txt
writing requirements to dynasor.egg-info/requires.txt
writing top-level names to dynasor.egg-info/top_level.txt
reading manifest file 'dynasor.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'dynasor.egg-info/SOURCES.txt'
Copying dynasor.egg-info to
build/bdist.linux-x86_64/wheel/./dynasor-2.1.egg-info
running install_scripts
creating build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts
copying build/scripts-3.13/dynasor ->
build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts
changing mode of
build/bdist.linux-x86_64/wheel/dynasor-2.1.data/scripts/dynasor to 755
creating build/bdist.linux-x86_64/wheel/dynasor-2.1.dist-info/WHEEL
creating
'/<<PKGBUILDDIR>>/.pybuild/cpython3_3.13/.tmp-kaxmww6n/dynasor-2.1-py3-none-any.whl'
and adding 'build/bdist.linux-x86_64/wheel' to it
adding 'dynasor/__init__.py'
adding 'dynasor/correlation_functions.py'
adding 'dynasor/logging_tools.py'
adding 'dynasor/sample.py'
adding 'dynasor/units.py'
adding 'dynasor/cli/__init__.py'
adding 'dynasor/cli/main.py'
adding 'dynasor/core/__init__.py'
adding 'dynasor/core/reciprocal.py'
adding 'dynasor/core/rho_j_q_numba.py'
adding 'dynasor/core/time_averager.py'
adding 'dynasor/post_processing/__init__.py'
adding 'dynasor/post_processing/atomic_weighting.py'
adding 'dynasor/post_processing/average_runs.py'
adding 'dynasor/post_processing/filon.py'
adding 'dynasor/post_processing/neutron_scattering_lengths.json'
adding 'dynasor/post_processing/neutron_scattering_lengths.py'
adding 'dynasor/post_processing/spherical_average.py'
adding 'dynasor/post_processing/weights.py'
adding 'dynasor/post_processing/x_ray_form_factors.py'
adding
'dynasor/post_processing/form-factors/compton-parameters-waasmaier-kirfel-1995.json'
adding
'dynasor/post_processing/form-factors/electron-parameters-kmax2-peng-1996.json'
adding
'dynasor/post_processing/form-factors/electron-parameters-kmax6-peng-1996.json'
adding 'dynasor/post_processing/form-factors/waasmaier.txt'
adding 'dynasor/post_processing/form-factors/x-ray-parameters-itcc-2004.json'
adding
'dynasor/post_processing/form-factors/x-ray-parameters-waasmaier-kirfel-1995.json'
adding 'dynasor/qpoints/__init__.py'
adding 'dynasor/qpoints/lattice.py'
adding 'dynasor/qpoints/spherical_qpoints.py'
adding 'dynasor/qpoints/tools.py'
adding 'dynasor/tools/__init__.py'
adding 'dynasor/tools/acfs.py'
adding 'dynasor/tools/damped_harmonic_oscillator.py'
adding 'dynasor/tools/structures.py'
adding 'dynasor/trajectory/__init__.py'
adding 'dynasor/trajectory/abstract_trajectory_reader.py'
adding 'dynasor/trajectory/ase_trajectory_reader.py'
adding 'dynasor/trajectory/atomic_indices.py'
adding 'dynasor/trajectory/extxyz_trajectory_reader.py'
adding 'dynasor/trajectory/lammps_trajectory_reader.py'
adding 'dynasor/trajectory/mdanalysis_trajectory_reader.py'
adding 'dynasor/trajectory/trajectory.py'
adding 'dynasor/trajectory/trajectory_frame.py'
adding 'dynasor-2.1.data/scripts/dynasor'
adding 'dynasor-2.1.dist-info/licenses/LICENSE'
adding 'dynasor-2.1.dist-info/METADATA'
adding 'dynasor-2.1.dist-info/WHEEL'
adding 'dynasor-2.1.dist-info/top_level.txt'
adding 'dynasor-2.1.dist-info/RECORD'
removing build/bdist.linux-x86_64/wheel
Successfully built dynasor-2.1-py3-none-any.whl
I: pybuild plugin_pyproject:165: Unpacking wheel built for python3.13 with
"installer" module
dh_auto_test -O--buildsystem=pybuild
I: pybuild base:384: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14/build;
python3.14 -m pytest -k 'not test_integration_static_structure_factor'
ImportError while loading conftest
'/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14/build/tests/conftest.py'.
tests/conftest.py:7: in <module>
from dynasor.sample import Sample, DynamicSample, StaticSample
dynasor/__init__.py:7: in <module>
from .correlation_functions import (compute_dynamic_structure_factors,
dynasor/correlation_functions.py:1: in <module>
import numba
/usr/lib/python3/dist-packages/numba/__init__.py:77: in <module>
from numba.misc.special import (
/usr/lib/python3/dist-packages/numba/misc/special.py:3: in <module>
from numba.core.typing.typeof import typeof
/usr/lib/python3/dist-packages/numba/core/typing/__init__.py:1: in <module>
from .context import BaseContext, Context
/usr/lib/python3/dist-packages/numba/core/typing/context.py:10: in <module>
from numba.core.typeconv import Conversion, rules
/usr/lib/python3/dist-packages/numba/core/typeconv/rules.py:2: in <module>
from .typeconv import TypeManager, TypeCastingRules
/usr/lib/python3/dist-packages/numba/core/typeconv/typeconv.py:16: in <module>
raise ImportError(msg)
E ImportError: Numba could not be imported.
E
--------------------------------------------------------------------------------
E If you are seeing this message and are undertaking Numba development work,
you may need to rebuild Numba.
E Please see the development set up guide:
E
E https://numba.readthedocs.io/en/stable/developer/contributing.html.
E
E
--------------------------------------------------------------------------------
E If you are not working on Numba development, the original error was:
'cannot import name '_typeconv' from 'numba.core.typeconv'
(/usr/lib/python3/dist-packages/numba/core/typeconv/__init__.py)'.
E For help, please visit:
E
E
https://numba.readthedocs.io/en/stable/user/faq.html#numba-could-not-be-imported
E: pybuild pybuild:483: test: plugin pyproject failed with: exit code=4: cd
/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14/build; python3.14 -m pytest -k 'not
test_integration_static_structure_factor'
I: pybuild base:384: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13/build;
python3.13 -m pytest -k 'not test_integration_static_structure_factor'
============================= test session starts ==============================
platform linux -- Python 3.13.11, pytest-9.0.2, pluggy-1.6.0
rootdir: /<<PKGBUILDDIR>>
plugins: typeguard-4.4.4
collected 134 items / 1 deselected / 133 selected
tests/filon/test_filon.py ... [ 2%]
tests/test_SED.py ... [ 4%]
tests/test_average_independent_samples.py .. [ 6%]
tests/test_cli.py . [ 6%]
tests/test_dho.py .... [ 9%]
tests/test_dynasor_API.py ...... [ 14%]
tests/test_integration.py . [ 15%]
tests/test_lattice.py .. [ 16%]
tests/test_logging.py . [ 17%]
tests/test_normalization.py .. [ 18%]
tests/test_numba.py . [ 19%]
tests/test_parse_gromacs_index_file.py ... [ 21%]
tests/test_qpoints.py ...... [ 26%]
tests/test_regression_vs_old_cmdline_results.py . [ 27%]
tests/test_sample_class.py ........... [ 35%]
tests/test_spherical_average.py ..... [ 39%]
tests/test_time_averager.py . [ 39%]
tests/test_tools.py ..... [ 43%]
tests/test_trajectory_and_window_iterator.py ............ [ 52%]
tests/test_trajectory_frame.py ... [ 54%]
tests/test_units.py . [ 55%]
tests/test_utils.py . [ 56%]
tests/test_weighting.py .............................. [ 78%]
tests/test_weights.py .. [ 80%]
tests/trajectory_reader/test_ase_trajectory_reader.py ....... [ 85%]
tests/trajectory_reader/test_extxyz_trajectory_reader.py ....... [ 90%]
tests/trajectory_reader/test_lammps_trajectory_reader.py ...... [ 95%]
tests/trajectory_reader/test_mdanalysis_trajectory_reader.py ...... [100%]
=============================== warnings summary ===============================
.pybuild/cpython3_3.13/build/tests/test_dynasor_API.py: 10 warnings
.pybuild/cpython3_3.13/build/tests/test_trajectory_and_window_iterator.py: 12
warnings
.pybuild/cpython3_3.13/build/tests/test_trajectory_frame.py: 2 warnings
/usr/lib/python3.13/multiprocessing/popen_fork.py:67: DeprecationWarning:
This process (pid=93) is multi-threaded, use of fork() may lead to deadlocks in
the child.
self.pid = os.fork()
.pybuild/cpython3_3.13/build/tests/test_trajectory_and_window_iterator.py::test_trajectory_with_mdanalysis_reader_xtc
.pybuild/cpython3_3.13/build/tests/test_trajectory_frame.py::test_read_indices_from_trajectory
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_only_from_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_from_user_matching_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_from_user_not_matching_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_stopiteration_of_closed_file
/usr/lib/python3/dist-packages/MDAnalysis/core/universe.py:1916: UserWarning:
there is no reference attributes in this universe to guess types from
warnings.warn(str(e))
.pybuild/cpython3_3.13/build/tests/test_trajectory_and_window_iterator.py::test_trajectory_with_mdanalysis_reader_xtc
.pybuild/cpython3_3.13/build/tests/test_trajectory_frame.py::test_read_indices_from_trajectory
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_only_from_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_from_user_matching_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_units_from_user_not_matching_traj
.pybuild/cpython3_3.13/build/tests/trajectory_reader/test_mdanalysis_trajectory_reader.py::test_stopiteration_of_closed_file
/usr/lib/python3/dist-packages/MDAnalysis/core/universe.py:1916: UserWarning:
there is no reference attributes (elements, types, or names) in this universe
to guess mass from
warnings.warn(str(e))
-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
========== 133 passed, 1 deselected, 36 warnings in 103.60s (0:01:43) ==========
dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.14
3.13" returned exit code 13
make: *** [debian/rules:6: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess failed with exit
status 2
--------------------------------------------------------------------------------
--- End Message ---
--- Begin Message ---
Source: numba
Source-Version: 0.65.1+dfsg-1
Done: Stuart Prescott <[email protected]>
We believe that the bug you reported is fixed in the latest version of
numba, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Stuart Prescott <[email protected]> (supplier of updated numba package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Mon, 11 May 2026 18:34:46 +1000
Source: numba
Architecture: source
Version: 0.65.1+dfsg-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Science Maintainers
<[email protected]>
Changed-By: Stuart Prescott <[email protected]>
Closes: 1126230 1131064
Changes:
numba (0.65.1+dfsg-1) unstable; urgency=medium
.
* Team upload.
* Upload to unstable.
* New upstream release.
- refresh patches
- provides compatibility with NumPy 2.4 (Closes: #1131064)
- fixes import failures with NumPy 2.4 (Closes: #1126230)
.
numba (0.64.0+dfsg-1) experimental; urgency=medium
.
* New upstream release.
Checksums-Sha1:
88138239db7105328b3fa381fe2b53e1c7f23189 2865 numba_0.65.1+dfsg-1.dsc
b3e1839b799123b75b81b72cb5c2ac7e67055c4c 2050720 numba_0.65.1+dfsg.orig.tar.xz
71195b49afaeef81389a4d5150729c33831f2e8c 19132
numba_0.65.1+dfsg-1.debian.tar.xz
f3651137bb4fa50fd07bd21d294a8cd5b976d70e 4225880 numba_0.65.1+dfsg-1.git.tar.xz
3779aa451c6a4736153e2442c95821a738bca433 17364
numba_0.65.1+dfsg-1_source.buildinfo
Checksums-Sha256:
2b49f4b2a546fb44e39b61deaa832e6728f1dbdecdc2ead9151b6d7edd6faf4e 2865
numba_0.65.1+dfsg-1.dsc
530d9ac6fce8ec74811e36c51ad9c34ede0415f1a572047d060454ec49810e5c 2050720
numba_0.65.1+dfsg.orig.tar.xz
7393276dda76c6a442d3092c5fc6fb0f2cf9a76e7f8315de6cceade8abac0a4f 19132
numba_0.65.1+dfsg-1.debian.tar.xz
63fb8a0347ac1a2f15c5e16f61e9b5ec0f77ec5c3a37305751d09d4bbe7e9400 4225880
numba_0.65.1+dfsg-1.git.tar.xz
e588141bc7462fe9e5a72a182e9b68e7062efd47427e1f8f096a2ea7674ba435 17364
numba_0.65.1+dfsg-1_source.buildinfo
Files:
aca8161d85427fe66fdf6dbbd559f684 2865 science optional numba_0.65.1+dfsg-1.dsc
9eafa5b024e20805399e5e0c29789553 2050720 science optional
numba_0.65.1+dfsg.orig.tar.xz
a00b641a6bf34d65a2ae29e080d27737 19132 science optional
numba_0.65.1+dfsg-1.debian.tar.xz
f2d78d4697de02c4cd83db0cb20e5779 4225880 science None
numba_0.65.1+dfsg-1.git.tar.xz
46391959fac007df983bc325f2916c91 17364 science optional
numba_0.65.1+dfsg-1_source.buildinfo
Git-Tag-Info: tag=843d239569b625b8f36ecb3c7f1cb12b5e94b420
fp=90e2d2c1ad146a1b7ebb891dbbc17ebb1396f2f7
Git-Tag-Tagger: Stuart Prescott <[email protected]>
-----BEGIN PGP SIGNATURE-----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=JEEv
-----END PGP SIGNATURE-----
pgptWnKaT2ca6.pgp
Description: PGP signature
--- End Message ---
--
debian-science-maintainers mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/debian-science-maintainers
