Hi again, this is the second round of the attempt to get all packages maintained by Debian Science team properly injected into the Debian Science tasks. There are 87 remaining source packages. I added the accorcing binary packages which actually need to be mentioned inside any of our tasks files (or might be part of new tasks files). I also added the maintainer ID who did the last change to this package.
I hope we can boil down this list a bit further and in a third round
I'll ping the according maintainers about their opinion. You might also
like to point out pure preconditions for some scientific software that
should not belong to any tasks file and I'll whitelist these in the
script (see below).
Kind regards
Andreas.
On Mon, Dec 16, 2013 at 10:22:43AM +0100, Andreas Tille wrote:
> I totally rewrote the script
> which is now based on the fact that Blends data are now also kept in
> UDD. I commited the script to
>
>
> http://anonscm.debian.org/gitweb/?p=blends/website.git;a=blob;f=misc/sql/0-uncategorised.sh
source |
bin
|
changed_by
---------------------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+---------------------------------------------------------
alglib | libalglib-dev, libalglib3.8, libalglib3.8-dbg
| Anton Gladky
<[email protected]>
ann | libann-dev, libann0, ann-tools
| Teemu Ikonen
<[email protected]>
arduino-mk | arduino-mk
| Scott Howard
<[email protected]>
arpack++ | libarpack++2c2a, libarpack++2-dev
| Sylvestre Ledru
<[email protected]>
aster | code-aster, code-aster-engine, code-aster-dev,
code-aster-engine-dbg, code-aster-mpi-engine, code-aster-mpi-engine-dbg,
code-aster-mpi-engine-dev, code-aster-test |
Andrea Palazzi <[email protected]>
cbflib | libcbf-dev, libcbf0, cbflib-bin, cbflib-doc
| Teemu Ikonen
<[email protected]>
cliquer | cliquer, libcliquer-dev, libcliquer1
| Bernhard R. Link
<[email protected]>
clp | coinor-clp, coinor-libclp1, coinor-libclp-dev,
coinor-libclp-doc, coinor-libclp1-dbg
| Miles Lubin
<[email protected]>
cminpack | libcminpack-dev, libcminpack1.0.90, cminpack-doc
| Mathieu Malaterre
<[email protected]>
coinor-cgl | coinor-libcgl1, coinor-libcgl-dev, coinor-libcgl-doc,
coinor-libcgl1-dbg
| Miles Lubin
<[email protected]>
coinor-osi | coinor-libosi1, coinor-libosi-dev, coinor-libosi-doc,
coinor-libosi1-dbg
| Miles Lubin
<[email protected]>
coinor-symphony | coinor-symphony, coinor-libsymphony3,
coinor-libsymphony-dev, coinor-libsymphony-doc, coinor-libsymphony3-dbg
|
gregor herrmann <[email protected]>
coinutils | coinor-libcoinutils3, coinor-libcoinutils-dev,
coinor-libcoinutils-doc, coinor-libcoinutils3-dbg
| Miles Lubin
<[email protected]>
diet | diet-agent, libdiet-sed2.8, libdiet-sed2.8-dev,
libdiet-client2.8, libdiet-client2.8-dev, libdiet-dagda2.8,
libdiet-dagda2.8-dev, libdiet-admin2.8, libdiet-admin2.8-dev, diet-doc
| Haïkel Guémar <[email protected]>
double-conversion | libdouble-conversion1, libdouble-conversion-dev,
libdouble-conversion-dbg
| Sébastien
Villemot <[email protected]>
dune-common | libdune-common-dev, libdune-common-dbg,
libdune-common-2.2.1, libdune-common-doc
|
Ansgar Burchardt <[email protected]>
dune-geometry | libdune-geometry-dev, libdune-geometry-dbg,
libdune-geometry-2.2.1, libdune-geometry-doc
| Ansgar
Burchardt <[email protected]>
dune-grid | libdune-grid-dev, libdune-grid-dbg, libdune-grid-2.2.1,
libdune-grid-doc
| Ansgar Burchardt
<[email protected]>
dune-istl | libdune-istl-dev, libdune-istl-doc
| Ansgar Burchardt
<[email protected]>
dune-localfunctions | libdune-localfunctions-dev, libdune-localfunctions-doc
| Ansgar Burchardt
<[email protected]>
dxflib | libdxflib-dev, libdxflib-2.5.0.0, libdxflib-2.5.0.0-dbg
| Scott Howard
<[email protected]>
eficas | eficas
| Chunis Deng
<[email protected]>
eigen3 | libeigen3-dev, libeigen3-doc
| Anton Gladky
<[email protected]>
einspline | libeinspline0, libeinspline-dev, libeinspline-dbg
| Sébastien Villemot
<[email protected]>
feel++ | libfeel++1, libfeel++-dev, libfeel++-dbg, feel++-apps,
feel++-doc
| Christophe
Prud'homme <[email protected]>
ferari | python-ferari
| Johannes Ring
<[email protected]>
fftw | fftw2, fftw-dev, sfftw2, sfftw-dev, fftw-docs
| Sylvestre Ledru
<[email protected]>
flann | libflann-dev, libflann1.8, flann-doc
| Mathieu Malaterre
<[email protected]>
gfm | gfm
| Andreas B. Mundt
<[email protected]>
glpk-java | libglpk-java
| Sébastien Villemot
<[email protected]>
gmp | libgmp10, libgmpxx4ldbl, libgmp-dev, libgmp10-doc,
libgmp3-dev
| Steve M.
Robbins <[email protected]>
gnuplot-iostream | libgnuplot-iostream-dev, libgnuplot-iostream-doc
| Anton Gladky
<[email protected]>
hyantesite | libhyantes-dev, libhyantes0, hyantesite
| serge guelton
<[email protected]>
imview-doc | imview-doc
| Teemu Ikonen
<[email protected]>
instant | python-instant
| Johannes Ring
<[email protected]>
inventor | libinventor1, inventor-dev, inventor-doc,
inventor-clients, inventor-data, inventor-demo
| Steve
M. Robbins <[email protected]>
ipe | ipe, libipe7.1.4, libipe-dev
| Steve M. Robbins
<[email protected]>
ipe5toxml | ipe5toxml
| Steve M. Robbins
<[email protected]>
kwwidgets | libkwwidgets1-dev, libkwwidgets1.0.1009,
kwwidgets-examples, kwwidgets-doc, python-kwwidgets, tcl8.5-kwwidgets
|
Mathieu Malaterre <[email protected]>
libfolia | libfolia-dev, libfolia2
| Adam Conrad
<[email protected]>
libqglviewer | libqglviewer-dev, libqglviewer2, libqglviewer-doc
| Anton Gladky
<[email protected]>
libquantum | libquantum-dev, libquantum8
| Boris Pek
<[email protected]>
libticables | libticables-dev, libticables2-6, libticables2-dbg
| Andreas B. Mundt
<[email protected]>
libticalcs | libticalcs-dev, libticalcs2-11, libticalcs2-11-dbg
| Andreas B. Mundt
<[email protected]>
libticonv | libticonv-dev, libticonv7, libticonv-dbg
| Andreas B. Mundt
<[email protected]>
libtifiles | libtifiles-dev, libtifiles2-9, libtifiles2-9-dbg
| Andreas B. Mundt
<[email protected]>
logservice | logcentral, logcentral-tools,
liblogservicecomponentbase2, liblogservicecomponentbase2-dev,
liblogservicetoolbase2, liblogservicetoolbase2-dev, liblogforwarderutils2,
liblogforwarderutils2-dev | Haïkel Guémar <[email protected]>
luasseq | luasseq
| Andreas Tille
<[email protected]>
metis-edf | metis-edf, libmetis-edf4.1, libmetis-edf-dev
| Christophe Trophime
<[email protected]>
minieigen | python-minieigen
| Anton Gladky
<[email protected]>
minpack | minpack-dev, libminpack1
| Sylvestre Ledru
<[email protected]>
mpi-defaults | mpi-default-dev, mpi-default-bin
| Sébastien Villemot
<[email protected]>
mrmpi | libmrmpi-dev, libmrmpi1, mrmpi-doc
| Mathieu Malaterre
<[email protected]>
ntl | libntl0, libntl-dev
| Bernhard R. Link
<[email protected]>
openblas | libopenblas-base, libopenblas-dev
| Sébastien Villemot
<[email protected]>
openctm | libopenctm-dev, libopenctm1, openctm-tools,
python-openctm, openctm-doc
| Teemu
Ikonen <[email protected]>
openigtlink | libopenigtlink-dev, libopenigtlink1.10,
libopenigtlink1.10-dbg, openigtlink-doc, openigtlink-examples
|
Dominique Belhachemi <[email protected]>
openstereogram | openstereogram
| Scott Howard
<[email protected]>
parmetis | libparmetis-dev, libparmetis3.1, parmetis-test,
parmetis-doc
| Sylvestre
Ledru <[email protected]>
pivy | python-pivy
| Anton Gladky
<[email protected]>
polyml | polyml, libpolyml-dev, libpolyml1
| Konstantinos
Margaritis <[email protected]>
pygts | python-gts
| Anton Gladky
<[email protected]>
python-quantities | python-quantities
| Andrea Palazzi
<[email protected]>
qtexengine | libqtexengine-dev, libqtexengine1
| Scott Howard
<[email protected]>
qwtplot3d | libqwtplot3d-qt4-dev, libqwtplot3d-qt4-0,
libqwtplot3d-doc
| Gudjon
I. Gudjonsson <[email protected]>
r-cran-rjson | r-cran-rjson
| Sébastien Villemot
<[email protected]>
r-cran-statmod | r-cran-statmod
| Sébastien Villemot
<[email protected]>
salome-kernel | salome-kernel, salome-kernel-dev, salome-kernel-doc,
salome-kernel-dbg
| Julien Cristau
<[email protected]>
scilab-jims | scilab-jims
| Sylvestre Ledru
<[email protected]>
scilab-metanet | scilab-metanet
| Sylvestre Ledru
<[email protected]>
scirenderer | libscirenderer-java, libscirenderer-java-doc
| Sylvestre Ledru
<[email protected]>
sciscipy | python-sciscipy
| Sylvestre Ledru
<[email protected]>
slepc | libslepc3.4.2-dev, libslepc3.4.2, libslepc3.4.2-dbg,
slepc3.4.2-doc
| Christophe
Trophime <[email protected]>
slicot | libslicot0, libslicot-dev, libslicot-pic, libslicot-doc,
libslicot-dbg
| Sébastien Villemot
<[email protected]>
soqt | libsoqt-dev-common, libsoqt4-20, libsoqt4-dev
| Anton Gladky
<[email protected]>
suitesparse-metis | libsuitesparse-metis-3.1.0, libsuitesparse-metis-dev,
libsuitesparse-metis-dbg
| Sylvestre Ledru
<[email protected]>
sundials | libsundials-serial, libsundials-cvode1,
libsundials-cvodes2, libsundials-ida2, libsundials-idas0, libsundials-kinsol1,
libsundials-nvecserial0, libsundials-serial-dev, octave-sundials |
Sébastien Villemot <[email protected]>
svgtoipe | svgtoipe
| Steve M. Robbins
<[email protected]>
tamuanova | libtamuanova-dev, libtamuanova-0.2
| Scott Howard
<[email protected]>
tetgen | tetgen, libtet1.4, libtet1.4-dev
| Sylvestre Ledru
<[email protected]>
tiemu | tiemu
| Andreas B. Mundt
<[email protected]>
tilem | tilem, tilem-data
| Andreas B. Mundt
<[email protected]>
tilp2 | tilp2
| Andreas B. Mundt
<[email protected]>
viennacl | libviennacl-dev, libviennacl-doc
| Michael Wild
<[email protected]>
visp-images | visp-images-data
| Thomas Moulard
<[email protected]>
vmtk | libvmtk1.0, python-vmtk, libvmtk-dev, vmtk
| Johannes Ring
<[email protected]>
vtk | vtk-doc, vtk-examples, libvtk5.8, libvtk-java,
libvtk5-dev, libvtk5.8-qt4, libvtk5-qt4-dev, tcl-vtk, python-vtk
| Sebastian
Ramacher <[email protected]>
(87 rows)
--
http://fam-tille.de
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]
