More questions to come :-(
The maschine: Sun Ultra 1, Creator 2D graphic card. Prolem: cannot set XFree resolution and refresh rate in /etc/X11/XF86Config-4 using "sunffb" *Google* Found http://www.sunhelp.org/faq/FrameBuffer.html so I have to set the frame buffers parameters at a different place. http://www.sunhelp.org/faq/FrameBuffer.html#99 says 1020x800 at 85 Hz would be okay for any Creator 3D so I issued | plasmatic:/# eeprom output-device=screen:r1024x800x85m After reboot nothing seems to have changed, my monitor's on screen display reports a refresh rate of 66 Hz which basically sucks. ,---- | plasmatic:/home/niehaus# eeprom |grep output | output-device=screen:r1024x800x85m | plasmatic:/home/niehaus# `---- My command must have had *some* effect: the parameters have been stored in the eeprom. What am I doing wrong? Any hints? TIA Sebastian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
