On Tue, Oct 10, 2000 at 05:01:06PM -0400, Rafael E. Herrera wrote: > I've got this Sun monitor. Since I usually connect remotely to my sparc > ipc box, I'd like to hang the monitor off of the second video card in my > PC (I've got an adaptor.) The model is GDM1662 or GDM1662B, not sure as > I write this, I'll check when I get home. I've got scan freqs from > http://www.monitorworld.com/Monitors/sun/ but could no get it to work. > Can someone give me a hand on this? Thanks.
It's a fixed frequency monitor, most probably an OEM from Sony. A friend of mine connected a HP fixed frequency monitor to his PC, you can read his hints at: http://historia.et.tudelft.nl/~marcj/fixed_freq/ You probably don't have to solder within the monitor (yours seems to be able to use combined sync), but there is quite a lot of information on that page that can be useful for fixed frequency monitors. I don't know what video card you use, but I have very good experiences with a Matrox Millenium II because it can do funny things like sync-on-green and combined sync. Don't know about the newer Matrox cards, but I assume they still have those features. Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED] WWW: http://www-ict.its.tudelft.nl/~erik/
