On Sat, Dec 30, 2000 at 10:54:55AM -0500, Robert Reif wrote: > Hi, > > I'm having a problem getting a modem connection speed other than > 9600. I hacked pppd to print out the termios speeds and they are being > set properly. I also hacked chat to print out the connection speed and > it is always 9600 regardless of the speed set in the file in > /etc/ppp/peers. > I double check the connection speed with ping which always gives the > same results. > > I have tried different modems and different firmware loads with the same > > result. The modems work fine on NT. Both modems used to work with > 2.1 and with woody up to about two months ago. I'm currently using a > standard 2.2 off a cd. > > I could go back to 2.1 or I could borrow an rs232 analyzer and keep > hacking > at the source but I thought I would check if anyone has any suggestions > before > I dig into it further.
Hello. I don't know if it would bear any on your problem, but at least with my Sparc IPX and USR Sportster v90 modem, the only way I can connect via ppp with it is by turning off flow control in both ppp and on the modem. I think there might be some kind of funky hybrid flow control that MIGHT work, but I don't know past that. And I max out at 38400. -- Ferret
