Hi All,
Just some information, that might be perhaps remotely interesting ?? :-)
We've got unstable/testing up and running here on an E250. I've noticed
the following behaviour:
At boot time, just after the portmapper is started, there is some
garbage printed to the screen (around 30 non alphabetic chars) and the
console is no longer responsive. The machine does proceed to boot, and
after turning the console off and on I can get a login prompt.
The system is fine and responsive for some time (units of hours) and
then suddenly stops accepting connections and allowing people to log in
on the console. Running processes continue to run (eg. xload, xterm,
etc), but new processes hang.
Without the portmap package installed (current version in unstable),
this phenomenon does not occur (or should I say, hasn't yet - 3 days
uptime so far).
This is also kernel independant (ie. both 2.4.5 and 2.2.19 give me this
same beheviour), except the 2.2.19 crashes completely if you nfs mount
a drive (should I elaborate more here ?).
Anyway, nothing here is concrete evidence, I just wanted to send in
some info just in case someone else had experienced the same ? or does
in the future.
Cheers,
Marcus
--
.....
,,$$$$$$$$$, Marcus Crafter
;$' '$$$$: Computer Systems Engineer
$: $$$$: Open Software Associates GmbH
$ o_)$$$: 82-84 Mainzer Landstrasse
;$, _/\ &&:' 60327 Frankfurt Germany
' /( &&&
\_&&&&' Email : [EMAIL PROTECTED]
&&&&. Business Hours : +49 69 9757 200
&&&&&&&: After Hours : +49 69 49086750
