On Mon, 21 Jan 2002, Alvaro F. Figueroa Cabezas wrote: > > > Since this card does not seem to be supported under the current kernels > > and no one has even been able to identify it, could any of you tell me > > what PCI ethernet cards (make/model/part number) do work on the SunBlade > > 100 boxes? > > I does work with kernel 2.4.17. >
Unfortunately, it fails against the 2.4.17 source with the same error. 2.4.17 does boot and run without the HME card. Dentry-cache hash table entries: 65536 (order: 7, 1048576 bytes) Inode-cache hash table entries: 32768 (order: 6, 524288 bytes) Mount-cache hash table entries: 8192 (order: 4, 131072 bytes) Buffer-cache hash table entries: 32768 (order: 5, 262144 bytes) Page-cache hash table entries: 65536 (order: 6, 524288 bytes) POSIX conformance testing by UNIFIX Entering UltraSMPenguin Mode... Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: Probing for controllers. PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20 SABRE: Shared PCI config space at 000001fe01000000 SABRE: DVMA at c0000000 [20000000] PCI0(PBMA): Bus running at 33MHz isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial] ebus: No EBus's found. PCIO serial driver version 1.54 su(serial) at 0x1fe020003f8 (tty 0 irq 12,7eb) is a 16550A su(serial) at 0x1fe020002e8 (tty 1 irq 12,7eb) is a 16550A clock_probe: Cannot find timer chip Program terminated ok > > I really do need to get a second ethernet port working on this box. > > I have tried with eepro100 network cards on Ultra 5's. They sould work on > blades too. > > > Otherwise it will be relegated to a back room role. :( > > Well, you could send it to me of course ;) Oh, we won't waste it. /grin Bob -- ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> Bob Van Cleef, Systems Administrator (408) 734-8100 MicroUnity, Inc. FAX (408) 734-8136 376 Martin Ave., Santa Clara, CA 95050 [EMAIL PROTECTED]
