hmm, good advice I guess, but I can't reply to you directly.... ---- The original message was received at Sat, 2 Feb 2002 09:51:53 +0100 (CET) from [EMAIL PROTECTED] [213.64.105.59]
----- The following addresses had permanent fatal errors ----- <[EMAIL PROTECTED]> ---- I wanted to reply to you that I tried your suggestion, bot with :d and :a, and that this was my setup: df -H Filesystem Size Used Avail Use% Mounted on /dev/sda4 753M 674M 41M 95% / /dev/sda1 20M 4.9M 14M 26% /boot /dev/sdb1 1.0G 435M 547M 45% /usr /dev/sdc1 722M 150M 535M 22% /var /dev/sdc2 671M 59M 578M 10% /home /dev/sdd1 1.0G 326M 653M 34% /share1 /dev/sdd2 1.0G 21k 977M 1% /share2 that is I have my boot image in /dev/sda1 and my root in /dev/sda4. I also want to tell you that I have two scsi controllers: esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) esp1: IRQ 53 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) scsi0 : Sparc ESP100A-FAST scsi1 : Sparc ESP236-FAST scsi : 2 hosts. Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi1, channel 0, id 1, lun 0 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdd at scsi1, channel 0, id 2, lun 0 scsi : detected 1 SCSI cdrom 4 SCSI disks total. esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sda: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB] [1.0 GB] esp0: target 3 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB] [1.0 GB] esp1: target 1 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdc: hdwr sector= 512 bytes. Sectors= 2767245 [1351 MB] [1.4 GB] esp1: target 2 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sdd: hdwr sector= 512 bytes. Sectors= 4096656 [2000 MB] [2.0 GB] (this was with booting from the install image 2.2.19-sun4cdm) Any more help is greatly appreciated. TIA, /ChJ On Sat, Feb 02, 2002 at 09:35:10AM +0100, Christian Jönsson wrote: > > > -----Ursprungligt meddelande----- > Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] david howe > Skickat: den 2 februari 2002 08:13 > Till: Christian Jönsson > Ämne: Re: Help please to debug failure to boot from disk on ss20 running > woody > > > Christian Jönsson wrote: > > > > I have a SPARCserver 20 that I run an up to date woody on. > > > > When I try booting from disk I instantly get an > > Illegal Instruction. > > > > <#0> ok boot disk > > Boot device_ /iommu/sbus/[EMAIL PROTECTED],400000/[EMAIL > > PROTECTED],800000/[EMAIL PROTECTED],0 File and > > args: (then I can't see more on my serial port access) > > Illegal Instruction > > Can u boot with a command like > #0 ok boot /iommu/sbus/espdma/esp/[EMAIL PROTECTED],0:d > > david >
