Hi. I received my SS20 without documentation, too. But I found usefull informations on the web. My favorite site is in german, I think it does not make sense to send you the link. Does it?
The refresh rate depends on the monitor you use. Try to config X with xf86cfg. Would you like to have a copy of my XF86Config-4? Good luck, Hartwig On Saturday 30 November 2002 00:27, dima wrote: > Hartwig ! Thanks for your help. > > >Hi. > > > >What is standard? > > I know that using "standard" is wrong here. By that I mean only my hope > that my sparcstation 20 configuration is typical, the one widely used, may > be. The problem is that I got this machine without a single doc from a > friend. > > I can't find any meaningfull names on my mice, keyboard that I can match > against the ones used in X11 configuration that Debian install suggests. > The same problem with graphic card. I think in worst case I will > disassemble the box ... > > >I have an SBUS graphics card in my SS20, it uses the suncg6 driver. If you > >use the onboard graphics (with VSIMM module), you will need a different > >driver. And if you use an SBUS graphics other than mine (TGX I think) > > maybe, too. > > I'll try these. What are possible refresh rates for the monitor ? > > >The mouse device is /dev/sunmouse, the protocol is BusMouse. > > I used 'sunmouse' but with wrong protocol I think, so mouse did not > respond. I'll try to fix these and will post my X11 config when everything > will work. > > Thanks again ! > Dima >
