I'm using an Ultra 10 with LG CD R-W, it burns and it's ide, you can grab ide-scsi.o for 2.4.18 or 2.2.20 and use it. The silo.conf has the append, don't forget to use modconf to add the module or modify the corresponding files in /etc
http://ingenieria.sanmartin.edu.co/~itamara/debian/sparc/2.2.20/ide-scsi.o http://ingenieria.sanmartin.edu.co/~itamara/debian/sparc/2.4.18/ide-scsi.o Steve> On Sat, 2003-07-19 at 16:03, ayoj wrote: Steve> Steve> > i am also trying to setup my cd writer on debian ultra sparc Steve> > but finding it hard to find the modules Steve> > Steve> > can you help ? Steve> Steve> Steve> There is no ide-scsi module in the /lib/modules/2.4.19 tree for Steve> UltraSPARC that I use. There is an ide-scsi module in the 2.4.21 Steve> modules tree. Steve> Steve> After you have a kernel with the ide-scsi module, you need to add a line Steve> to silo.conf like Steve> Steve> append="hdc=ide-scsi" Steve> Steve> in the section for your particular kernel. This is for a CD-RW drive that Steve> is on the secondary controller set as master, i.e. /dev/hdc. Steve> Steve> Note: I know that this append command works in lilo.conf on x86 boxes Steve> from experience, but I am inferring from the silo.conf docs that Steve> this same approach works on an UltraSPARC; I have not yet used an IDE Steve> CD-RW drive in Ultra hardware. Steve> Steve> -- SP Steve> Steve> Steve> Steve> -- Steve> To UNSUBSCRIBE, email to [EMAIL PROTECTED] Steve> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] Steve> -- -- 53 cosas que no quisieras escuchar de tu administrador de red -- (15/53) Toma el mouse con propiedad y dice "Vamos a Entorno de Red y ..." http://igor.tamarapatino.org/jokes/nomyadminplease.php
