I spent all day fight my ultra 5 trying to get a second video card to be picked up by the system. At first I tried dropping in a matrox millineum II, but after a couple hours playing with that, I gave up and dropped in a mach64 card since it was supposed to use the same "ati" drive for X as the onboard Rage Pro.
Both cards appear to be detected by the system, yet I can't get X to show up on pci card for the life of me. The onboard ATI chipset works when I pass the option BusID "PCI:1:2:0" to my XF86Config file, but I can't figure out what to pass to get the pci to show up. Here's some info: lspci output: 00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi 00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) 00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) 01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) 01:03.0 IDE interface: CMD Technology Inc PCI0646 (rev 03) 02:03.0 VGA compatible controller: ATI Technologies Inc 210888GX [Mach64GX] (rev 01) scanpci output: <snip> pci bus 0x0001 cardnum 0x01 function 0x01: vendor 0x108e device 0x1001 Sun Happy Meal pci bus 0x0001 cardnum 0x02 function 0x00: vendor 0x1002 device 0x4750 ATI Mach64 GP pci bus 0x0001 cardnum 0x03 function 0x00: vendor 0x1095 device 0x0646 CMD 646 pci bus 0x0002 cardnum 0x03 function 0x00: vendor 0x1002 device 0x4758 ATI Mach64 GX I've done multiple video cards on x86 with no problem, but I doubt this is sparc specific... Any ideas before I admit defeat & give up? Thanks in advance, -Mark -- Mark T. Valites Unix Systems Analyst CIT - SUNY Geneseo >--))> >--))>
