Hello, everybody, I try to boot a Sun E250 which has no monitor or keyboard. Following the instructions in the UltraLinux FAQ <URL:http://www.ultralinux.org/faq.html>, I configured a PC with FreeBSD and minicom to act as the serial console.
When I power on the machine in the Diagnostics position, I see the boot messages. So my cables and emulator are OK. But sending Break with Ctrl-A F does not seem to have any result: I cannot get the boot prompt (ok). When I power on the machine in Power-On mode, I get nothing on the screen, not one message. Last screen of messages in Diagnostics mode (after that, nothing moves): Primary I/O probing Probing /[EMAIL PROTECTED],4000 at Device 1 network Probing /[EMAIL PROTECTED],4000 at Device 3 scsi disk tape scsi disk tape Probing /[EMAIL PROTECTED],4000 at Device 2 Nothing there Probing /[EMAIL PROTECTED],4000 at Device 4 Nothing there Probing /[EMAIL PROTECTED],4000 at Device 5 Nothing there Probing /[EMAIL PROTECTED],2000 at Device 0 This slot excluded from probing... Probing /[EMAIL PROTECTED],2000 at Device 1 Nothing there Probing /[EMAIL PROTECTED],2000 at Device 2 Nothing there Probing /[EMAIL PROTECTED],2000 at Device 3 Nothing there Probing /[EMAIL PROTECTED],2000 at Device 4 Nothing there Probing /[EMAIL PROTECTED],2000 at Device 5 Nothing there
