-----Original Message----- From: Art Haas Hi.
[CUT] The machine needs to use SCSI drives with an 80-pin connector, and the drives must be skinny - about 1" high or so. I've hunted around a bit for drives like this, but not found much other than the drives Sun offered for the machine way back when, and the largest of those was about 4 Gig. I'm wanting to get at least 10 Gig per drive if possible. [CUT] Any 3.5", 1" high SCSI Hard Drive with an SCA (power, bus, ID selection) connector should work without any issue, from Sun, or any other source. If the new drive is Hyper-Wide SCSI 12000, it should be able to adapt to the fast/wide mode automatically. eBay should be your friend. Nico
