Dear Listmembers, I can confirm: - 2.4.26: X11 works ok - 2.4.27: X11 works ok / same configuration / (nearly) same .config - file - 2.4.28: no X11 / same configuration / (nearly) same .config - file
U60 SMP Elite 3D SCSI-Hdd Adaptec 29160 Controller Internal network card eth0 Tigon TG3 as secondary adapter Promise Ultra IDE-Controller The Elite - firmware gets downloaded to the device (tested). This cause (as risen by Jörg Friedrich) is out of scope, here. So, the gurus are in charge now. I am willing to supply any information beyond the scope of what I have provided last week. Please let me know. Something must have changed with 2.4.28 that makes X11 fail. CU Dieter -- ________________________________________________ HARMAN BECKER AUTOMOTIVE SYSTEMS Dr.-Ing. Dieter Jurzitza Manager Hardware Systems System Development Industriegebiet Ittersbach Becker-Göring Str. 16 D-76307 Karlsbad / Germany Phone: +49 (0)7248 71-1577 Fax: +49 (0)7248 71-1216 eMail: [EMAIL PROTECTED] Internet: http://www.becker.de ******************************************* Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden. *******************************************
