Dear listmembers, after attaching a USV (SmartUsv 1500 from APC) to my U60 I found that due to a initialization sequence sent to the serial port during reset the USV always switches to battery operation even though mains is stable. In the apcupsd-documentation I found a hint that one should set the OBP - variabel comX-noprobe=true; however, my OBP does not have such a variable to set. Does anybody out there know what would be the corresponding setting here? Many thanks in advance, take care
Dieter Jurzitza This is the output of eeprom on my side: security-mode=none security-password: data not available. security-#badlogins=0 oem-logo: data not available. oem-logo?=false oem-banner: data not available. oem-banner?=false hardware-revision: data not available. last-hardware-update: data not available. diag-switch?=false name=options oekalux09:/proc# eeprom scsi-initiator-id=7 keyboard-click?=false keymap: data not available. ttyb-rts-dtr-off=false ttyb-ignore-cd=true ttya-rts-dtr-off=false ttya-ignore-cd=true ttyb-mode=9600,8,n,1,- ttya-mode=9600,8,n,1,- pcia-probe-list=1 pcib-probe-list=1,3,2,4,5 enclosure-type=540-3251 banner-name=Sun Ultra 60 UPA/PCI energystar-enabled?=true mfg-mode=off diag-level=min #power-cycles=3800 system-board-serial#=5015606041092 system-board-date=394faa27 fcode-debug?=false output-device=screen:r1280x1024x76 input-device=keyboard load-base=16384 boot-command=boot auto-boot?=true watchdog-reboot?=false diag-file: data not available. diag-device=net boot-file=172.16.56.152 root=/dev/sda2 boot-device=net cdrom disk local-mac-address?=false ansi-terminal?=true screen-#columns=100 screen-#rows=50 silent-mode?=false use-nvramrc?=true nvramrc=devalias /[EMAIL PROTECTED],4000,[EMAIL PROTECTED],1/[EMAIL PROTECTED],0:f extdisk security-mode=none security-password: data not available. security-#badlogins=0 oem-logo: data not available. oem-logo?=false oem-banner: data not available. oem-banner?=false hardware-revision: data not available. last-hardware-update: data not available. diag-switch?=false name=options -- ________________________________________________ HARMAN BECKER AUTOMOTIVE SYSTEMS Dr.-Ing. Dieter Jurzitza Manager Hardware Systems System Development Industriegebiet Ittersbach Becker-Göring Str. 16 D-76307 Karlsbad / Germany Phone: +49 (0)7248 71-1577 Fax: +49 (0)7248 71-1216 eMail: [EMAIL PROTECTED] Internet: http://www.becker.de ******************************************* Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden. *******************************************
