Hi, If i use the testing-netinst the installation works fine if I install the stable release. But when I boot up I've got the same errors with the partition check as before. (see below) If I try to install the Etch version with the installer it stops at 'couldn't find debs for ipchains'. Any clues ? thanks,
2005/8/5, Pooly <[EMAIL PROTECTED]>: > Hi, > > I've removed two stick (out of 4) of memory, and try to change their > slot (from 0-1 to 2-3), but neither attempt worked. I tried > with/without ramdisk_size=16000. > I believe the : > Partition check: > hda:end_request: I/O error, dev 03:00 (hda), sector 0 > end_request: I/O error, dev 03:00 (hda), sector 2 > end_request: I/O error, dev 03:00 (hda), sector 4 > end_request: I/O error, dev 03:00 (hda), sector 6 > end_request: I/O error, dev 03:00 (hda), sector 8 > end_request: I/O error, dev 03:00 (hda), sector 10 > end_request: I/O error, dev 03:00 (hda), sector 12 > end_request: I/O error, dev 03:00 (hda), sector 14 > > Should not be worring because Linux is not yet installed on this disk. > (still an old solaris) > > 2005/8/5, Frederic Lehobey <[EMAIL PROTECTED]>: > > Hi, > > > > On Thu, Aug 04, 2005 at 03:20:17PM +0100, Pooly wrote: > > > > > > I'm trying to install a Debian 3.1 on an Ultra5. When I boot on the CD > > > (3.1r0a-sparc-netinst) I end up with a kernel panic with : > > > Ramdisk : couldn't find valid RAM disk image starting at 0 > > > Cramfs: wrong magic > > > > > > I've google a bit, and I've found nothing which works. > > > Any hints on this ? > > > > I do not believe it is enough so solve your problem, but beware of > > #305230. > > > > Best regards, > > Frederic Lehobey > > > > > > -----BEGIN PGP SIGNATURE----- > > Version: GnuPG v1.4.1 (GNU/Linux) > > > > iD8DBQFC8y6SKJ61IisCKVERAsZrAJ9o6jin/HAfRZXmRTSJR6mbYvf2UQCgzw9w > > hadPKdaBEKPrFqsZhuMsY3U= > > =gLvQ > > -----END PGP SIGNATURE----- > > > > > > > > > -- > -- > Webzine Rock : http://www.w-fenec.org/ > -- Webzine Rock : http://www.w-fenec.org/
