On Sun, Sep 11, 2005 at 02:27:47PM +0100, Tom Taylor wrote: > Hi, > > I am trying to set up an Ultra 2 with s/ware raid 0 with the intent to > set LVM on the top . I know that LVM supports stripping itself, but I > would like to do it this way anyway. > > The machine is a dual Ultra 2 (2x 296MHz/2MB) with 1536MB RAM and 2x > internal SCSI 9.1GB HDDs (and SCSI CDROM). I am netbooting 'Sarge' > 2.6 current installer for sparc64. It seems to find all devices ok, > and I can access my hdds from > /dev/scsi/host0/bus0/target[01]/lun0/disc. > > I am trying to set up both hdds with a 50MB partition at the start of > the disk (will be the /boot on the first disk, and probably unused on > the second) and the remainder of the disk as partition for riad (Type > 0xfd iirc). > > When I use the installer (both in normal and expert mode), I cannot > find an option to set the partition for use with raid (can find
It's there, but it can be easy to miss. I seem to remember having this problem myself. You go through the screens, add the two partitions, and then you are taken back to a screen that you've seen before, but what you don't notice is at the bottom there is a new item for the raid device. Once you select that you are good to go. a -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
