-- debian-31r0a-sparc-binary-1 install not booting correctly on ULTRA-10. This is the sunULTRA 5/10 with single UltraSparc-IIi 333mHz CPU. The OpenBoot is v3.19. There is 768MB of 50ns memory.
All stages of the background SS20 install of my previous post went normally with the commands and errors showing on the black screen only after booting. With the ULTRA-10 install the commands and errors appered on the black screen right away: FDC 0is a National Semiconductor Pc87306 RAMDISK driver initialized: 16 RAMDISKS of 16384k size 1024 blocksize Uniform Multi-platform E-IDC driver ide: Assuming Revision: 7.00beta4-24 33mHz system bus speed for PIOmodes: override with idebus=xx CMD646:IDE controller at PCI slot 01:030 CMD646:chipset revision 3 CMD646: 100% native modeon irq4.7c0 ide0:BM-DMA at 0x1fe02c00020-0xfe02 00027, BIOS settings:hdaighdb:pio ide0:BM-DMA at 0x1fe02c00020-0xfe02 00027, BIOS settings:hdcighdd:pio hda:ST391404A,ATA DISK drive ide: Assuming 33mHz system bus speed for PIO modes:override hdc: SONY CD-RW CRX300E ATAPI CD/DVD[ROM drive ide0: at 0x1fe02c0000-0xife02c000070-1fe02c0000a on irq4.70 Partition check: hda:end_request: I/O error, dev03:00(hda) sector2 hda:end_request: I/O error, dev03:00(hda) sector4 hda:end_request: I/O error, dev03:00(hda) sector6 hda:end_request: I/O error, dev03:00(hda) sector0 hda:end_request: I/O error, dev03:00(hda) sector10 hda:end_request: I/O error, dev03:00(hda) sector12 hda:end_request: I/O error, dev03:00(hda) sector14 hda:end_request: I/O error, dev03:00(hda) sector0 hda:end_request: I/O error, dev03:00(hda) sector2 hda:end_request: I/O error, dev03:00(hda) sector4 hda:end_request: I/O error, dev03:00(hda) sector6 hda:end_request: I/O error, dev03:00(hda) sector0 hda:end_request: I/O error, dev03:00(hda) sector10 hda:end_request: I/O error, dev03:00(hda) sector12 hda:end_request: I/O error, dev03:00(hda) sector14 unable to read the partition table usb.c:required new driver usbdevfc usb.c:required new driver hub usb.c:required new driver usbmouse usbmouse c:v1.6:USB HID Boot Protocol mousedriver usb.c: registered new driver usbdevfs .. initializing cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 RAMDISK: could not find valid RAMdisk image starting at 0 Freeing initrd memory 2970k freed cramcis: wrong magic kernel panic:UFS: unable to mount root fs om 00:00 Press Li-A to return to boot prompt ******************** What are the next steps after this bad result? thanks Don Parsons [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
