Hi, Yep, looks like you may have a corrupted NVRAM/PROM on the machine and so OpenBoot isn't working - it may be worth seeking advice from someone that knows more about SPARC's etc. but it sounds like a new PROM is needed for the machine - it is possible to re-flash the PROM from the OpenBoot command line, but it needs to boot from cdrom, which it's sounding like yours won't do :(
-----Original Message----- From: Didier BERNARD [mailto:[EMAIL PROTECTED] Sent: 12 June 2006 14:49 To: [email protected] Subject: RE: boot trouble i do: printenv -> data access exception set-defaults -> data access exception go -> data access exception test cdrom -> data access exception test disk -> data access exception test-all -> data access exception the only command that do something is: probe-scsi-all -> /[EMAIL PROTECTED],e00000/[EMAIL PROTECTED],e0001000/[EMAIL PROTECTED],400000/[EMAIL PROTECTED],800000 Target 1 Unit 0 Disk IBM ..... Target 3 Unit 0 Disk QUANTUM ..... Target 6 Unit 0 Removable Read only device TOSHIBA.... it's like i've only a piece of the openboot.. :/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
