Thanks for suggestion, but adding sunhme to /etc/modules does not help. Should I add sunhme to /etc/initramfs/modules too? I will try to add sunlance. As a matter of facts, I have installed discover1 with the help of "aptitude install discover1". Is it added to boot process automatically or should I do something?
Greetings, Donatas > -----Original Message----- > From: Jurij Smakov [mailto:[EMAIL PROTECTED] > Sent: Thursday, December 14, 2006 6:25 AM > To: [EMAIL PROTECTED] > Cc: [email protected] > Subject: Re: No network after upgrade to etch(2.6.18) on Ultra 1 > > Labas, > > On Wed, Dec 13, 2006 at 11:37:32PM +0200, > [EMAIL PROTECTED] wrote: > > Hi, > > > > I have upgraded my Ultra 1 UltraSparc from sarge to etch > (following description > > in release notes for sparc), then upgraded to kernel 2.6.18. > > Well, during boot I'm getting: > > > > SIOCSIFADDR: No such device > > eth0: ERROR while getting interface flags: No such device > > SIOCSIFNETMASK: No such device > > SIOCSIFBRDADDR: No such device > > eth0: ERROR while getting interface flags: No such device > > eth0: ERROR while getting interface flags: No such device > > > > Any help? > > Right, in 2.6.18 the sbus devices were switched to the new driver > model, as a side effect udev does not detect them anymore. You can > work around it by manually loading the module for your card (most > likely 'sunlance' or 'sunhme'), by adding it to /etc/modules, for > example. > > Best regards, > -- > Jurij Smakov [EMAIL PROTECTED] > Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
