On Sun, 2008-11-02 at 18:14 -0500, Brian Thompson wrote: > mike wrote: > > I'm doing a serial port install on a Sun e220r using a db25 to rj45 > > adapter and then an rj45 to db9 adapter (with a cat-6 cable in between). > > Does anyone know what speed the serial port on the client needs to be > > set to? > > > > Right now I'm using these settings: > > TERM= /dev/ttyS0 > > Speed= 9600 > > parity = none > > 8-bits with 1 stopbit > > no flow control > > > > Thanks much for help > > > > > > By default those are the correct settings. That cable setup probably > needs a null modem > adapter at one end though if the db25 and db9 adapters that you're using > are the standard > silver ones with a Sun part number on them. Or, you can try recrimping a > RJ45 cable that, > instead of straight through, has conductors 3 and 6 swapped at one end. > > -Brian > I'm going to get a commercial DB25->DB9 connector and use my null modem cable. The DB25->RJ-45 connector seems to be jerry-rigged from Ebay and the other one is from my IT instructor for CISCO routers. Though I did note that the serial ports were set up for RS-432 operation instead of 232.
Thanks, Michael -- Michael 2008 SkillsUSA National Bronze Medalist A+ Certified -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
