Hi. I don't know if this is related to Nataraj Basappa's problem above or not. It sounds like it might be, but perhaps a worse incarnation.
I am trying to install 5.0.2 on a Blade 100. I first tried a netinstall CD. Openboot refused to see the disc, producing the 'bad disk label' error. I then setup the rarp/tftp netinstall option using the image here: http://ftp.nl.debian.org/debian/dists/lenny/main/installer-sparc/current/images/netboot/ The image boots fine, and the installer progresses to disk detection, at which point it says that it can not detect the disk, aska me to select a driver. Switching to the shell, I see the ALI IDE controller in lspci. I also see in lsmod that alim15x3 is loaded. When I look in /proc/ide, I see ide0 and ide1 directories, but no hda, hdb, etc. I'd like to try using the ide=nodma option, but I don't get a SILO prompt when using the tftp option. Is there a way to pass kernel options to the tftp image? Another thing that may be significant, is that I got the machine with an ancient version of Red Hat on it (with a 2.4 kernel). Before I tried to install debian, it would boot. But now when I do 'boot disk' from OBP, it produces the "bad magic number in disk label" error. I did remove the disk at one point, but I've checked several times to make sure everything is seated properly. Thanks for any help anybody may have on this. Please let me know if any more information might be useful. -- Jordan Bettis -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
