I'm not sure there's enough information on your configuration to provide good recommendations, but take a look into the local_mac_address? Open-Boot PROM setting and see if that helps. When set "true" it allows each interface to have a different MAC address, rather than the "system" MAC address.
Thanks, E 2010/2/2 Vladimir R <[email protected]>: > > > Hello all, > after install Lenny on Sun Ultra 5, > I succesfully setup network on first interface, eth0, > with local network address, and it works well. > Then I want to setup eth1 to external addresses, > but found, that I have no eth1, but have eth1_rename, > with same MAC address as eth0. > I want to have eth1 interface with diffrent MAC. > I saw posts in this list with exact problem, > but no solution was given. > I tried to modify /etc/udev/rules.d/70-persistent-net.rules, > /etc/network/interfaces, but it does not helped. > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact [email protected] > > -- E -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
