This looks okay to me, please post your prtconf -pv as well. It's about the XVR-600 PCI device ID and machine information.
Thanks, Frans van Berckel On Mon, 2010-03-15 at 12:16 -0400, Paul Cao wrote: > Sorry if anything is out of place. Very hard to see through the r display. > Any hope? > lspci output: > > 0000:00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 > Gigabit Ethernet > 0001:00:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz > Ultra3 SCSI Adapter (rev 01) > 0001:00:04.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz > Ultra3 SCSI Adapter (rev 01) > 0002:00:02.0 Bridge: Intel Corporation 21555 Non transparent PCI-to-PCI > Bridge (rev 03) > 0002:00:04.0 PCI bridge: Texas Instruments PCI2250 PCI-to-PCI Bridge (rev 02) > 0002:00:06.0 Non-VGA unclassified device: ALi Corporation M7101 Power > Management Controller [PMU] > 0002:00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge > [Aladdin IV/V/V+] > 0002:00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link > Controller Audio Device (rev 02) > 0002:00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > 0002:00:0b.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > 0002:00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c4) > 0002:01:08.0 USB Controller: NEC Corporation USB (rev 43) > 0002:01:08.1 USB Controller: NEC Corporation USB (rev 43) > 0002:01:08.2 USB Controller: NEC Corporation USB 2.0 (rev 04) > 0002:01:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 > IEEE-1394a-2000 Controller (PHY/Link) > 0003:00:02.0 Display controller: 3DLabs Sun XVR-500 Graphics Accelerator (rev > 01) -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
