Hi Chris, as fas as I know the PGX64 is identical to a ATI 3D Rage XL. I had the same difficulties you mentioned with my Blade 150 and the onboard graphic (yes, it's the same one). In my special case there was no modul "mach64" because of security reasons in the debian netinstall kernel. I found a "FATAL: Module mach64 not found." in /var/log/Xorg.0.log.
I solved this by getting the sources form http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.33.tar.bz2 building an new kernel with mach64 support an installing it on the blade 150. My xorg.conf is the following one: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "extmod" Load "dri2" Load "dbe" Load "record" Load "dri" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 30-65 VertRefresh 50-75 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "probe_sparse" # [<bool>] #Option "accel" # [<bool>] #Option "crt_display" # [<bool>] #Option "composite_sync" # [<bool>] #Option "hw_cursor" # [<bool>] #Option "force_pci_mode" # [<bool>] #Option "dma_mode" # <str> #Option "agp_mode" # <i> #Option "agp_size" # <i> #Option "local_textures" # [<bool>] #Option "buffer_size" # <i> #Option "mmio_cache" # [<bool>] #Option "test_mmio_cache" # [<bool>] #Option "panel_display" # [<bool>] #Option "reference_clock" # <freq> #Option "shadow_fb" # [<bool>] #Option "sw_cursor" # [<bool>] #Option "AccelMethod" # <str> #Option "RenderAccel" # [<bool>] Identifier "Card0" Driver "mach64" VendorName "ATI Technologies Inc" BoardName "Rage XL" BusID "PCI:0:19:0" Option "reference_clock" "29.500 MHz" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection gdm is up and running. I just made the installation yesterday, but it seems running stable. Have a nice day Dirk -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
